MegaBee V2.1 3 Inch FPV Racing Drone BNF F4 Flight Controller 2-4S 35A ESC 500mW VTX
This MegeBee V2.1 Frame was designed to carry a GoPro5/6/7! Small space? Tight gaps? Indoor safety? But you need that 4K? Well, here you go… There’s always that customer that has this indoor project but just want to get footage in 4K. Here’s the BNF you need to get the job done! You have this location you wanna fly in, but no way you’d fly your standard razor blades around you or your friends? Do you just love the style and the fact that “props just won’t break that often”? … GO FOR IT!
Specification:
Brand name: iFlight
Item name: MegaBee 3 Inch FPV Racing Drone BNF
Flight Tower: SucceX-E 35A ESC V2 + SucceX Mini F4 V2 Flight Tower System 2-6S with 500MW VTX
Motor: XING 1408 3600KV
Camera: Caddx Ratel, 2.1mm lens
Wheelbase: 146mm
Bottom plate thickness: 3mm
Top plate thickness: 2mm
Top and bottom plate spacing: 25mm (aluminum column height 25mm)
Propeller size: 3 inch
FC pattern: 20*20mm
FPV cam spacing: 19mm
Weight: 255.9g
Features: – Lightweight frame that can take some hits – Prop guards to protect the sensitive environment or yourself – GoPro Hero 7 full-size mount (25 degrees) + TPU case; DIY is out! – Bind and Fly; pre-built with care and reliability
NEEDS TO BE MENTIONED:
– Lightweight frame that can take some hits
– Prop guards to protect the sensitive environment or yourself
– GoPro full-size mount + TPU case; DIY is out!
– Bind and Fly; pre-built with care and reliability
Package Included:
1x MegaBee V2.1 FPV Racing Drone-BNF
4 pairs DALPROP T3045BN 3-blade Propeller
Note: The Gopro camera on the photos are not included. The camera of this drone is Caddx Ratel, 2.1mm lens.
If you want to buy the camera mount, you can click here .
MegaBee TPU 3D Printed GoPro Hero 8 Camera Mount 25°
Green Hornet 5.8G 3Inch 142mm CineWhoop 6S
Note: Gopro Mount is Not Included
Click for Gopro Hero 5/6/7
Click for Gopro Hero 8
Features:
– No Props or frame in view!
– High performance SucceX-E mini F4 FC + 35A BLHeli32 4 in 1 ESC + 300mW VTX
– T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
– Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
– Low Resonance frame construction (Less Jello, more Cinematic)
– Butter smooth XING-E 1408 2800KV motors
– Bumper prop guards to protect the sensitive environment or yourself
– Pre-tuned with smooth freestyle settings
The Green Hornet BNF Specs:
– Flight Tower: SucceX-E mini F4 FC + 35A BLHeli32 4 in 1 ESC + 300mW VTX
– Motor: XING 1408 6S 2800KV
– Camera: Caddx EOS2
– Wheelbase: 142mm
– Bottom plate thickness: 2mm
– Top plate thickness: 2mm
– Top and bottom plate spacing: 25mm (aluminum column height 25mm)
– Prop: 3 inch 3045 3-blade prop
– FC pattern: 20*20mm, 30.5*30.5mm
– FPV cam spacing: 14mm
– Weight: 260g (Without battery)
Recommended battery:
TATTU 22.2V 1300mAh 75C 6S Lipo (XT60 Plug)
The Green Hornet Quad BNF Included Components and Parts
Click For Replacement Spare Parts.
Prebuilt and tested Green Hornet BNF
1x Green Hornet
2x 3045 3-blade prop (Set of 4 – Color May Vary)
1x iFlight Lipo Strap
Eachine Cvatar 120mm 4S 2.5 Inch Cinewhoop Duct FPV Racing Drone PNP/BNF RunCam Nano2 Cam F722 DJI FC 1404 5000KV Motor 25A ESC Camera for Gopro / Insta360
Eachine Cvatar 120mm 2.5 Inch 4S Cinewhoop Duct FPV Racing Drone PNP/BNF RunCam Nano2 Cam F722 DJI FC 1404 5000KV Motor 25A ESC
Note: Camera Protection Case for Gopro is not Included.
It comes with parts for installing DJI FPV Air Unit to upgrade to DJI HD Version.
The Cvatar is the new cinewhoop from Eachine. It comes from the word Avatar, it combines with Cinewhoop and the science fiction feeling of Avatar. It is very stable and can fly around people and property safely. The possibilities of creation of videos are thus unlimited. The newest F722 FC in the Cvatar is DJI ready too, so you can switch to DJI digital system with ease. Get the Cvatar now and you can experience a different feeling of cinewhoops.
Specification:Brand Name:EachineItem name: Cvatar 120 Cinewhoop FPV Racing Drone 4S VersionNet Weight:165.3g (Weight with receiver)
Frame Kit | Wheelbase: 120mmSupported propellers: 2.5 InchMaterial: 3K Carbon FiberBottom plate thickness: 1.5mmTop plate thickness: 1.5mm Top and middle plate spacing: 25mmInstallation holes: 20×20/25.5×25.5Supported camera: 19x19mmOverall size: 180 * 175mmWeight: 72g (Does not include TPU parts) |
AIO FC ESC | F722 FC+25A BL32 ESC Input Voltage:3-6SFC Firmware: BF EACHINEF722ESC Firmware: Blheli32compatible DJI FPV systemDimensioms: 32.5*32.5mmWeight:8g FC:CPU: STM32F722MPU: MPU6000OSD: SupportBEC: 10V/1ABEC: 5V/2ALED: SupportBlackBox: NOUARTS: 4 ESC:Current Sensor: not supportConstant Current: 25APeak Current: 30A(10s) |
VTX | EACHINE NANO V3 VTXOutput power: MAX 400mWInput: DC 5VAntenna: UFLWeight: 2.4g |
Camera | RunCam Nano2 FPV CameraImage Sensor: 1/3 700TVL CMOSLente: 2.1mmInput Power: DC 5VDimensions: 14mm*14mm*16mmNet weight: 3.2g |
Motor | 1404 5000KV Brushless MotorMotor: KV5000 (4S)Input Voltage: 3-4SRecommended Prop(inch): 2.5 InchWeight: 9.8g |
Propeller | Gemfan D63 mm 2.5 Inch 5-Blade Propeller |
Recommended battery: (Not Included) | 4S:550mah-1000mAhQuantity: 4 CW & 4 CCW |
Package Included:1x Eachine Cvatar 120mm Freestyle Frame Kit
1x 25A F722 DJI AIO Flight Controller4x 1404 5000KV Brushless Motor1x EACHINE NANO V3 VTX1x RunCam Nano2 FPV Camera8x Gemfan D63 mm 2.5 Inch 5-Blade Propeller1x Hammer Antenna 2x Battery Strap1x Receiver(Optional)
HOMFPV Cine Wingsuit S PNP HD / Analog Version 100mm Wheelbase F405 AIO 4S Betaflight / F411 Betaflight Flight Controller 25A 4IN1 Blheli_S ESC FPV Racing Drone
Specification:
Brand: HOMFPV
Item Name: Wingsuit S RC Drone
Model: PNP HD / HD Analog Version
Wheelbase: 100mm
ESC: 25A 4IN1 Blheli_S ESC
Motor: 1404 4500KV Brushless Motor
Propeller: Gemfan D63 5Blades
Recommend Battery (No Included): TATTU 4S 650-850mAh
Weight: 140g
Power Unit Version:
Flight Controller: F405 AIO 4S Betaflight
VTX: NO
Camera: NO
Analog PNP Version:
Flight Controller: F411 4S Betaflight Flight Controller
VTX: 25-400mw with SmartAudio
Antenna: HOMFPV 5.8Ghz
Camera: Caddx Ant
Package Included:
1 x HOMFPV Wingsuit S RC Drone (Optional)
BETAFPV X-Knight 5 ” 6S FPV Stuzzicadenti Quad RC Drone con F4 35A AIO FC M02 5,8G VTX Caddx Baby Ratel fotografica
X-Knight 5 ” FPV Toothpick Quad è il primo drone da corsa Sub-250g 6S FPV sul mercato attuale! È ultraleggero 144 g ancora sotto i 250 g con la batteria, soddisfa perfettamente le attuali norme FAA, rende il tuo volo più facile senza limitazioni. Dotato di 35A AIO FC e batteria 6S da 550 mAh (non inclusa), questo quad stuzzicadenti ti darà sicuramente quella spinta e le prestazioni che stai cercando!
Punto elenco
X-Knight 5 ” Quad è il primo drone da corsa leggero 6S rilasciato su BETAFPV. È ultraleggero solo 144 g, che è inferiore a 250 g anche con la batteria, soddisfa perfettamente le attuali normative FAA, rende il tuo volo più facile senza limitazioni.
È il primo drone da corsa BETAFPV che installa l’AIO FC F4 35A! Questo FC supporta un sistema di alimentazione 6S e correnti continue fino a 35A, offre ai piloti un’eccellente esperienza di volo da corsa.
Equipaggiato con motori 1805 1550KV e eliche Gemfan 5125, X-Knight 5 ” offre un’esecuzione senza precedenti in spinta e controllo efficiente.
Altamente raccomandato per la batteria da 550 mAh 6S, darà al tuo drone più potenza e velocità.
Assemblato La nuova versione V2 del kit telaio da 5 ”, che adotta il materiale in fibra di carbonio T800, diventa la massima durata pur mantenendo un peso minimo di 26,44 g.
Specifiche
Articolo: X-Knight 5 ” FPV Stuzzicadenti Quad
Peso: 144 g (senza batteria)
FC e ESC: F4 35A AIO senza spazzola FC
Motori: 1805 1550KV senza spazzola Motori
Puntelli: Gemfan 5125 puntelli a 3 pale
Fotocamera: Caddx Baby Ratel Camera
VTX: M02 5.8G VTX
Batteria: batteria 550mAh 6S 75C (Non incluso )
Telaio: kit telaio X-Knight in fibra di carbonio 5 ” V2
Tettuccio: Tettuccio per Mini Cam V3
Opzione ricevitore: Frsky XM+ / DSMX / Futaba S-FHSS / TBS Crossfire
Controllore di volo
Stuzzicadenti 35A AIO senza spazzola FC- Il tabellone è il primo stuzzicadenti BLHeli_32 ESC 35A All-in-one FC sul mercato attuale. Può gestire 35 A di corrente continua (40A burst) e fornire livelli massicci di capacità di prestazioni, ma mantiene comunque l’ultraleggero solo 7 g. Inoltre, questa scheda supporta la batteria Lipo 2-6S, perfettamente adatta per il drone stuzzicadenti da 4 ” a 5 ”.
motori
1805 1550KV senza spazzola motori è un motore leggero che è il migliore per la potenza 6S. Pesa solo 16,1 g per 1 pezzo. Abbinato al meglio con le eliche a 3 pale Gemfan 5125, il motore è molto efficiente nell’uso e offre un’eccellente esperienza di volo in regata. In combinazione con Toothpick 35A AIO senza spazzola FC, ti fornirà una potenza di uscita sufficiente.
M02 5.8G VTX
La scheda M02 5.8G VTX è una scheda VTX da 5,8 GHz di alta qualità con 4 potenze regolabili tra cui 25 mW, 100 mW, 200 mW e 350 mW. Con una potenza di uscita di 350 mW, i piloti possono pilotare droni fino a 600 metri di distanza per esplorare più possibilità e divertimento.
-Peso solo 1,7 g.
-La funzione Smart Audio è inclusa
-Frequenza: 5,8 GHz 6 bande 40 canali
Caddx fotografica
Il Caddx Baby Ratel ha eccellenti prestazioni di visione notturna oltre a un’eccellente immagine diurna con una latenza estremamente bassa. La latenza è bassissima a soli 8 ms. È più leggero ma mantiene comunque un sensore HDR da 1 / 1,18 “di alta qualità, che fornisce una sensibilità fino a 0,0001 lux. È molto versatile in quanto è possibile alternare tra video PAL e NTSC e anche tra video 4: 3 e 16: 9 formati.
-Sensore di immagine: 1 / 1.8 Pollici sensore HDR starlight
-Risoluzione orizzontale: 1200TVL
-FOV: 160 gradi
-Min. Latenza: 8 ms
-Sistema TV: NTSC e PAL (modificabile)
-Immagine: 16: 9 e 4: 3 (modificabile)
-WDR: Super WDR (HDR)
-Min. Illuminazione: Starlight
-Sincronizzazione: interna
-Otturatore elettronico: PAL: 1/50 ~ 100.000; NTSC: 1/60 ~ 100.000
-Rapporto S / N:> 60dB (AGC OFF)
-Uscita video: CVBS
-Camera OSD: OSD separato
-DNR: 3-DNR
Kit telaio X-Knight in fibra di carbonio 5 ” V2
Il nostro primo kit telaio da 5 ” assemblato, che adotta materiale in carbonio T800, diventa la massima durata pur mantenendo un peso minimo di 26,44 g. È composto da bracci, piastra inferiore e piastra superiore, che consente di sostituire la parte danneggiata. Nel frattempo, la piastra superiore viene fornita con dadi a pressione per semplificare il processo di installazione.
Consigliato Batteria (non incluso)
La batteria da 550 mAh 6S 75C con connettore XT60U è l’opzione migliore per alimentare il quad 5 pollici X-Knight. Con un alto voltaggio 6S (22,2V) e una velocità di scarica di 75C, offre al drone prestazioni di volo più elevate per brevi raffiche.
Baldacchino stampato ad iniezione
Mini tettuccio V3 appositamente progettato per una fotocamera da 19-20 mm, che adotta il processo di stampaggio a iniezione e il materiale PE. Questo tettuccio resistente proteggerà perfettamente la tua fotocamera.
Il pacchetto include:
1 * X-Knight 5 ” FPV Stuzzicadenti Quad
1 * Gemfan 5125 Puntelli a 3 lame
1 * Set di viti in lega di titanio M2 * 8
HGLRC Settore 5 V3 6S Freestyle FPV Racing Drone Caddx Ratel Versione PNP / BNF Zeus F722 MT VTX 800MW 2306.5 1900KV Motore
Description:
The Sector5 V3 is a 5″ Freestyle quadcopter that comes fully built with everything you need to have an amazing flight experience! It has now gotten even better with the whole new features! Lots of new parts have been upgraded in the V3, including the new arm protectors, new GPS mount, power cable fixing mount. The upgraded carbon fiber, screws and TPU printed parts make the V3 more durable than the V2.
Features:
-Pre-installed LEDs and GPS.
Control the LED lights easily with the press of a button on the Zeus F722 FC. The Sector5 V3 also supports GPS-rescue with one of the most stable GPS – HGLRC M80 installed.
-No Props in view
No more props in view with the V3. Enjoy the clear view of flying!
-Adjustable camera mount angle
Adjust the angle of the camera mount from 25°, 30°, 35° to 40° to suit your needs.
-Capacitor slot to hide the capacitor for a neater look
Cannot find the capacitor in the drone? it is “hidden” somewhere 🙂
-A complete range of TPU parts
HGLRC Sector 5 V3 Freestyle FPV Racing Drone Caddx Ratel Version 6S
Net Weight:442.4g(Weight without receiver)
Sector 5 V3 Freestyle Frame 5 inch
Type:5″ frame
Wheelbase:218mm
Support for propellers:up to 5.5 inches
Overall size:172.5 * 136.7mm
Weight:177.9g(contain TPU)
Zeus F722 Flight Controller
MPU:MPU6000
CPU:STM32F722 RET6
Input Voltage:3-6S Lipo
BEC Output:5V/3A,9V/2A
Weight:7.6g
Zeus 48A BL_S 3-6S 4in1 ESC (Update FD 60A 4in1 ESC to Zeus 48A BL_S 3-6S 4in1 ESC From 2021/4/24)
Input Voltage:3-6S LipoSteady Current:48A
Peak Current:55A(10 Sec)
MT VTX 800MW
Output power:PIT/25/100/200/400/800mW
Input:DC 7-28V
Antenna:MMCX
Weight:5.2g
Caddx Ratel FPV Camera
Image Sensor:1/1.8 ” 1200TVL CMOS
Lente:2.1mm
Input Power:DC 5V
Dimensions:19mm*19mm*19mm
Net weight:8g
HGLRC 2306.5 Brushless Motor
1900KV (6S)
No.of Cells(Lipo):16.8 V
Recommended Prop(inch):5Inch
M80 GPS
Power Supply:5V
Size:18.5mm x 18.5mm x 7.1mm
Weight:9.4g
W554A LED Light board
Motor Valtage:2-6S
LED Voltage:5V
Overcurrent:50A
Size:34.8×7.9mm
Weight:5.2g(4 pcs)
Package Included:
1x F722 Flight Controller
1x 48A BL32 3-6S 4in1 ESC
1x MT VTX 800mW
1x Caddx Ratel FPV Camera
1x Sector 5 V3 Freestyle Frame Kit 6S
4x 2306.5 2550KV Motor
1x M80 GPS
4x W554A LED Light board
8x EthixS5 propeller
1x Hammer Antenna
4x Battery Strap
1x Receiver
HGLRC RekonFPV Rekon 3 Nano Long Range 1S 3 “140mm Interasse FPV Racing RC Drone Zeus5 AIO CADDX Nano ANT Rekon 1202.5 11600KV Motore
Il Rekon3 è sinonimo di semplicità e convenienza! Questo minuscolo quad è progettato attorno a una singola cella 18650 agli ioni di litio standard. Inserisci la batteria proprio come faresti nel telecomando di un televisore e subito sei pronto a volare per oltre 15 minuti. Ciò significa che puoi inserire abbastanza batterie per volare per diverse ore in tasca! Il Rekon3 è anche estremamente silenzioso e piccolo; Perfetto per volare nel tuo cortile o in un parco pubblico senza disturbare nessuno, esplorare un paesaggio montano epico o semplicemente andare in crociera dove vuoi.
Ma nonostante le dimensioni ridotte e la semplicità, non sottovalutare il Rekon3: la velocità di crociera è più alta di quanto probabilmente ti aspetti e poiché è equipaggiato con un potente 350mW VTX il Rekon3 ha diversi chilometri di portata del segnale video
Caratteristica fondamentale:
- Funziona su un 18650 batteria standard (è richiesta una cella con classificazione C elevato, consigliamo Sony VTC6 o simile)
- Motori specifici Rekon 1202.5 11600kV con eliche da 3 ”
- Piccolo e leggero (62,5 g senza batteria, motore da 140 mm a motore)
- Supporta la sintonizzazione WIFI tramite Speedy Bee sul tuo telefono cellulare
- Potente video da 350 mW trasmettitore per diversi chilometri di portata video
- La configurazione dell’elettronica consente di scaricare completamente la cella fino a 2,6 V.
Descrizione:
Marchio: HGLRC RekonFPV
Nome articolo: Rekon3 3 “RC Drone
Peso: 62,5 g (senza ricevitore)
Fare clic per il manuale in inglese
Telaio Rekon3 a lungo raggio | Interasse: 140mm Dimensione massima dell’elica: 3 Pollici |
Controllore di volo Zeus5 AIO 1-2S | Tensione di ingresso: 1-2 S Firmware di controllo del volo: Betaflight HGLRC411 (HGLR) Firmware ESC:BLHeli_S Dimensioni: 41,5 * 41,5 mm |
Zeus nano VTX 350mW | Potenza in uscita: PIT / 25/100/200 / 350mW Tensione di ingresso: CC 5V |
CADDX Nano ANT FPV fotografica | Sensore di immagine:1/3 CMOS 1000TVL Tensione di ingresso: CC 5V Dimensioni: 14 mm * 14 mm |
Motore brushless Rekon 1202.5 KV11600 | Tensione in ingresso: 3,8 V (1S) Elica consigliata: 3 Pollici |
GEMFAN 3018 Elica a 2 pale da 3 pollici | Quantità: 4 CW e 4 CCW |
ricevitore (Opzionale) | PNP senza ricevitoreFrsky XM+ ricevitoreRicevitore TBSRicevitore Frsky R-XSRRicevitore Flysky A8S V2 |
Batteria consigliata ( non incluso ) | 1S: 18650-3000 mAh |
Il pacchetto include:
1x telaio Rekon 3 a lungo raggio
1x controller di volo Zeus5 AIO
1x Zeus nano VTX 350mW
1x telecamera CADDX nano ANT FPV
4x motori brushless Rekon 1202.5 11600KV
8 eliche GEMFAN 3018 a 2 pale da 3 pollici
1x antenna a tubo di rame IPEX
1x ricevitore (opzionale)
Eachine Novice-IV 4 Inch 3-4S Sub 250g LR Micro Long Range FPV Racing Drone RTF & Fly more w/ EV800DM Goggles Radiomaster TX12 Transmitter
Notice:
NOVICE-IV comes already bound to your radio and on the right video channel matched with your goggle.
GPS Rescue was activated , make sure the GPS search for more than 6 satellites to lock the home position and then you can arm it .
We strongly recommend that you fly in an open place, away from crowds and buildings.
User Manual, Download
Spare Part , Click Here
Specifications:
Brand Name: Eachine
Item Name: Novice-IV 3-4S 4inch LR drone BNF and RTF
Wheelbase: 170mm
Size: 180mm*130mm*40mm(without propellers,batteries,antenna)
Weight: 125g (without battery)
Take off weight: 215g
Package Weight: 2.6kg
Package Size: 37x33x15cm
Features:
The lightest 4inch LR FPV drone
New AIO Flight controller with 25A ESC
Efficiency 1404 KV2750 brushless motor
Long flight time around 20minutes with stock battery Sub 250gram
Around 31minutes flight time with 4s 18650 3000mah
Very stable and easy to control
With M8N GPS Rescue system
With Buzzer and LED drone tracker finder
Distance Range more than 1KM in an Open area without interference
Spare parts specifications:
Motor | Mode: NC1404 KV options: KV2750 Configu-ration:9N12P Stator Diamter:14mm Stator Length:4mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ15mm*15mm Weight(g):9g |
Propeller | Material: PCWeight:1.61gPitch:2.4inProp Dia:102.33mmCenter Thickness:5.5mmCenter Hole Dia:1.5mm 3 holesAdaptive Motor:1408-1506Recommended Motor:1505-3600kvColors: Clear Gray |
Flight Controller | MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) Sensor: SPI Sensor MPU6000 for gyro and accelerometerBarometer: BMP280UART1/2/6 available Board size: 33MM * 30MM * 4.5MMMount holes: 20MM*20MM Power supply:3-4S battery input (DC 8V-26V) Built-in 25A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in OSD Max Current 100A Built-in 5V 1.5A BECBuilt-in 9V 1.5A BEC Built-in 8Mbyte BlackboxFirmware target: BetaflightF4 |
Onboard 4in1 ESC | EFM8BB21 Power supply: 3-4S LiPo/LiPo HV (7v/17v) Current: 25A continuous peak 30A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_7.HEX Default protocol: DSHOT600 |
Whoop_vtx_HP | Output power: 25~400mw switchable Frequency: 40CH Input voltage: 5VCurrent consumption: 100mA~400mA(type) Antenna Connector: U.FL Frequency: 5.8GHz 5bands 40 channels With RacebandSmartaudio ready Weight:3g |
Caddx Baby Ratel2 | Image Sensor: 1/1.8″ Inch starlight HDR sensor Horizontal Resolution: 1200TVLTV System: NTSC & PAL (changeable)IMAGE: 16:9 & 4:3 (changeable)WDR: Super WDR (HDR)Min. Illumination: StarlightLens: 18mmSynchronization: InternalElectronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000S/N Ratio : >60dB (AGC OFF)Video Output: CVBSFOV: 165 degreeDimensions: 14mm*14mm*19mmWeight: 4.6g (N.W.) |
GPS | Chip Model: Eachine Mini M8N GPSFeatures: GPS+SBAS or GPS+GLONASS+SBAS Position Accuracy: 2.0 m CEP Sensitivity2 Tracking & Nav: –167 dBm Cold starts: –148 dBm Hot starts: –156 dBmUpdate rate: 5HZ Default, up to 10HZ Baudrate: 57600 Optimize for Pixhawk and Pixracer running Ardupilot firmware Size: 20mm*20m*6mmWeight: 6gCold start waiting time: 3~5minutesWarm start waiting time: 0.5~1.5minutes |
Drone Track Finder | DT-B90 90dBi Finder BuzzerBuilt-in BatteryContinuous working time: around 30minutesWorking mode: Normal Buzzer model or Auto-alarm while Lost main battery.High-brightness LED indication90 dBi buzzer Input voltage: DC 4.5-9.0V Size: 25x16x15mm Weight: 5.83g |
Lipo Battery | Capacity:1100mAh Voltage:15.2v Continuous Discharge Rate: 50C Size: 60mmx35mmx25mm Weight: 90gConnector: XT30 |
EV800DM Goggles | Built-in with super HD DVR up to 720*576px resolution Diversity RaceBand 40ch Auto-Searching Two system (Display/recor d duo core separated chipsets ) ensure no delay in displaying and no frame lost in recor ding(please use C10 super speed card to ensure the full frame recor ding) Work friendly with player-OSD, no block on the important flying OSD information; Focal length adjustable design;Room for eyeglasses HD high brightness 3 inch LCD specially tuned for FPV racing; Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand; Advanced auto-searching function and the working frequency show on screen; Built-in 3.8V 2000mAh battery, each full charge offer 2.2 hours working time; Wide range re-charge voltage 5-180V; Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces; Super-wide visible angle up to 82 degree; 92% transparent lens adopted, no distort, no blur on the edge of screen; Light weight 320g with 2.2 hr 2000mAh battery, RTF for any scale racing game; 3 Inch 900*600px HD high brightness LCD |
2.4G Receiver | Brand Name: RadioMasterItem Name: R81 Nano ReceiverModel: R81Weight: 2gSize: 17*11 mmChannels: 8CHFrequency range: 2400-2483.5MhzPower input range: 4.5-6VSignal format: FrSky D8 CompatibleOutput format: SBUSSupport return: support return RSSIControl distance: more than 1kmAntenna length: Approximaltly 6cm |
Radio Transmitter | Brand Name: RadioMasterItem Name:TX12 TransmitterSize:170*159*108mmWeight: 363gFrequency: 2.400GHZ-2.480GHZRF Chip: Single-chip Multi-protocol(CC2500)Supported Protocols: Corona, Hitec, for Futaba S-FHSS,Frsky D16/D8, RadioLink, Graupner HoTTTransmitting Power: 20dbmAntenna Gain: 2dbWorking Current: 160mA@8.4VVoltage Range:6.6-8.4v DCRange: > 2km @ 20dbm (depending on receiver)Radio Firmware: OpenTX(Transmitter)/ Multi-Module(RF module)Channels: Up to 16 (depending on receiver)Display:128*64 Monochrome LCD displayGimbal: High precision potentiometer gimbalsExternal module:JR/FrSKY/Crossfire compatibleUpgrade Method: USB/SD card* & OpenTX Companion PC software*SD Card not included. |
Package Included:
RTF Version
1 x 170mm Novice-IV Frame
1 x CrazyF425 Flight Controller built-in 25A 4in1 Blheli_s ESC
1 x Eachine Mini M8N GPS
1 x DT-B90 Buzzer&LED Finder
4 x NC1404 KV2750 Brushless Motor
2 x Gemfan 4024-2 Toothpick Propeller Set
1 x Caddx Baby Ratel2
1 x Eachine 400mw VTX: 5.8g 25mw~400mw Switchable
2 x Eachine 4S 1100mah Battery 50C
1 x 2-4S Balance Charger with Adapter
1 x Eachine EV800DM Goggles
1 x Radiomaster R81 2.4G Receiver
1 x Radiomaster TX12 Transmitter
Fly more Version
1 x 170mm Novice-IV Frame
1 x CrazyF425 Flight Controller built-in 25A 4in1 Blheli_s ESC
1 x Eachine Mini M8N GPS
1 x DT-B90 Buzzer&LED Finder
4 x NC1404 KV2750 Brushless Motor
2 x Gemfan 4024-2 Toothpick Propeller Set
1 x Caddx Baby Ratel2
1 x Eachine 400mw VTX: 5.8g 25mw~400mw Switchable
4 x Eachine 4S 1100mah Battery 50C
1 x 2-4S Balance Charger with Adapter
1 x Eachine EV800DM Goggles
1 x Radiomaster R81 2.4G Receiver
1 x Radiomaster TX12 Transmitter
BETAFPV Beta85X V2 Versione flip-chip F4 AIO 12A V2 FC 4S 1105 Motore 5000KV con M02 25-350mW 5,8 Ghz VTX Whoop FPV Racing Drone PNP / Frsky XM + / DSMX / Futaba S-FHSS / TBS Crossfire
Specificazione:
Marchio: Beta85X
Nome articolo: versione Flip-chip
Sistema di alimentazione: 4S
Controllore di volo: F4 AIO 12A FC V2
Telaio: telaio Beta85X
Il motorei: 1105 5000KV con Connettore
Puntelli: EMAX Avan 2 “4-Blades Puntelli
Opzione ricevitore: Frsky XM+ / DSMX / Futaba S-FHSS / TBS Crossfire
Fotocamera: fotocamera EOS con angolo di 25-45 ° regolabile
Angolo di registrazione fotografica Montatura: 15 °
VTX: M02 25-350 mW 5,8 G VTX
Tempo di volo: 4 min – 5 min con 450 mAh 4 s 75C Batteria
Controllore di volo | CPU: STM32F411CEU6 (100MHZ)Sei assi: MPU6000 (connessione SPI)Dimensioni: 26mm x 26mm, whoop modello di montaggioVersione firmware: BETAFPVF411 (BEFH)OSD: OSD BetaFlight integrato (STM32 controlla il chip OSD su SPI in modalità DMA) |
ESC | Supporto BLheli / BLHELI_S suite Pass-through prontoSupporto PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600Tensione in ingresso: 2S-4S LipoContinua corrente: 12ACorrente di picco: 13AFirmware: BLHELI_SProcessore: SILABS EFM8BB21F16GFirmware di fabbrica: GH-30-16.7 |
Il motore | 1105 6000 KV 3S 11,1 V / 1105 5000 KV 4S 14,8 V 450 mAh Batteria |
Parti raccomandate (Non compreso):
Fotocamera: Insta360 GO camera,Clicca qui
Battery: 4S 450mAh Battery, Clicca qui
Caratteristiche:
Nuovo stile whoop, migliore operabilità al volo. Con la configurazione del pulsante piuttosto popolare, le telecamere e le batterie sono posizionate sulla parte superiore del drone. Il drone può essere controllato meglio in volo mentre il centro di gravità è concentrato.
Beta85X V2 supporta l’installazione di due telecamere HD, più scelte per le tue riprese FPV. Viene fornito in particolare con 2 supporti per fotocamera, i piloti possono equipaggiare la custodia per fotocamera Insta360 GO o Naked sul drone per ottenere un video abbastanza chiaro.
Fotocamera stabile, video nitido. Beta85x utilizza un ammortizzatore in gomma per eliminare ulteriormente le vibrazioni della fotocamera HD durante il volo. I piloti possono catturare tutti i bei momenti del volo con un video stabilizzato e chiaro.
Con il supporto per telecamera a 15 °, Beta85X V2 è perfettamente adatto per la registrazione di video HD su un volo regolare.
Il pacchetto include:
1 X Beta85X V2 Whoop Quadcopter
1 X Insta360 GO fotografica Mount
1 supporto fotografica nudo su misura X.
1 custodia X per Naked fotografica V2
1 X BEC Board
1 puntello EMAX Avan da 2 “a 4 lame (2CW + 2CCW)
Confezione da 1 X Vite
Happymodel Crux3NLR Nano LR 135mm Interasse a lungo raggio FPV Racing Drone con nuovo AIO 5in1 ELRSF4 2G4 FC CADDX ANT fotografica
Avviso: Batteria non incluso, si consiglia di utilizzare la batteria 18650 VTC6 per prestazioni migliori. Poiché l’AIO FC è compatto e integra VTX ad alta potenza, la temperatura interna del controller di volo sarà molto alta. E ‘normale. Si consiglia di sintonizzare il drone in buone condizioni di raffreddamento.
Introduzione:
Il Crux3NLR Nano LR è un quadricottero BNF 18650 style Nano Long Range FPV. Molto semplice e comodo, basta collegare un singolo 18650 batteria e poi collegarsi al volo. Crux3 NLR è dotato di controller di volo ELRSF4 2G4, il che significa che è integrato un collegamento radio ExpressLRS ad alte prestazioni che ti ha permesso di ottenere una portata migliore e un collegamento stabile. Il Crux3 NLR è inoltre dotato di GPS e cicalino, quindi sarebbe molto meglio per un lungo raggio FPV volo. Nonostante sia dotato di tanti dispositivi, il peso è di soli 68 grammi, quindi potremmo ottenere più tempo di volo.
Caratteristiche:
Nuovo controller di volo AIO 5in1 ELRSF4 2G4
CADDX ANT fotografica
Nuovo motore brushless 1202.5
18650 Batteria singola
Collegamento radio ad alte prestazioni
Tempo di crociera circa 17 min con un singolo 18650 batteria
Specifica:
Marca: Happymodel
Nome articolo: Crux3 NLR
Interasse: 135mm
Dimensioni: 125 mm x 115 mm x 40 mm (senza eliche)
Peso: 61 g (senza GPS)
67g (con GPS)
115g (con 18650 batteria)
Il motore | Modalità: EX1202.5 KV11500 Configu-razione: 9N12P Diametro statore: 12 mm Lunghezza statore: 2,5 mm Diametro albero: Φ 1,5 mm Dimensione del motore (Dia.*Len): Φ14mm*14.5mm Peso (g): 4,4 g No. di cellule (Lipo): 1S |
eliche | Gemfan 75mm Spessore centrale: 5 mm Diametro dell’elica: 75 mm Diametro del foro centrale: 1,5 mm Passo: 0,9 pollici |
controllore di volo | MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Sensore: MPU-6000 (connessione SPI) Compatibile con dimensioni whoop originali Alimentazione: 1S ingresso batteria (DC 2,9 V-4,35 V) Built-in 5A (ciascuno) Blheli_S 4in1 ESC Dshot600 pronto OSD Betaflight integrato (controllo SPI) Built-in 5.8G VTX Ricevitore SPI ExpressLRS da 2,4 GHz integrato 5V 1A BECFertore di luce integrato target firmware: CRAZYBEEF4SX1280 |
Onboard 4in1 ESC | MCU aggiornato a EFM8BB21 Alimentazione: 1S LiPo / LiPo HV Corrente: 5A picco continuo 6A (3 secondi) Supporta BLHeliSuite programmabile Firmware di fabbrica: O_H_5_REV16_8.HEX Protocollo predefinito: DSHOT300 |
SPI ExpressLRS a bordo 2,4 GHz ricevitore | Opzione frequenza pacchetto: 25Hz/50Hz/150Hz/250Hz/500Hz Frequenza RF: 2,4 GHz Antenna: antenna SMD Potenza in uscita telemetria: <12dBmReceiver protocol to flight controller: CRSFPotrebbe collegarsi con Happymodel ES24TX, ES24TX Lite, ES24TX Sottile e modulo ELRS TX fai da te a 2,4 GHz |
A bordo 5,8 g VTX | Potenza di uscita: 25 mw ~ 200 mw commutabile Frequenza: 40CH Tensione di ingresso: 3,3 V 5,5 V Assorbimento di corrente: 300mA (tipo) Frequenza: 5,8 GHz 5 canali 40 canali Con Race bandSmartaudio pronto |
Happymodel Mini M8N GPS (Solo con la versione GPS ha) | Modello chip: Mini M8N GPS Caratteristiche: GPS + SBAS o GPS + GLONASS + SBAS Precisione di posizione: 2,0 m CEP Sensitivity2 Tracking & Nav: -167 dBm Inizio del freddo: -148 dBm Inizio caldo: -156 dBm Frequenza di aggiornamento: 5HZ predefinita, fino a 10HZ Baudrate: 57600 Dimensioni: 20mm * 20m * 6mm Peso: 6 g Tempo di attesa per avvio a freddo: 3 ~ 5 minuti Tempo di attesa per avvio a caldo: 0,5 ~ 1,5 minuti |
Telecamera Caddx ANT 1200tvl | Sensore di immagine: sensore CMOS da 1/3″ Risoluzione orizzontale: 1200 TVL Sistema TV: NTSC o PAL IMMAGINE: 16: 9 o 4: 3 Sincronizzazione: Interno Otturatore elettronico: PAL: 1/50 ~ 100.000; NTSC: 1/60 ~ 100.000 Rapporto S / N:> 52 dB (AGC OFF) Uscita video: CVBS Obiettivo: 1,8 mm Min. Illuminazione: 0.001Lux@F1.2 Controllo automatico del guadagno: SI BLC: S WDR: Global WDR DNR: DNR 3D Dimensioni: 14 * 14mm (con staffa a 19 * 19mm) Ampio ingresso di alimentazione: DC 3,7-18 V. Temperatura di lavoro: -20 ℃ ~ + 60 ℃ Peso: 2 g (NO) |
Il pacchetto include:
N. GPS Versione:
1x telaio NLR Crux3
1x controller di volo ELRSF4 2G4 AIO 5-in-1
1x cicalino
4x Happymodel EX1202.5 motore brushless KV11500
1x Gemfan eliche bi-pala da 75 mm (4cw + 4ccw)
1x Caddx Ant 1200TVL Global WDR con OSD 2g Ultra Light Nano FPV fotografica
1x 5.8G integrato 25mw~200mw 40ch vtx (controllore di volo integrato)
1x Vite Driver
1x strumento di smontaggio dell’elica
Con versione GPS:
1x telaio NLR Crux3
1x controller di volo ELRSF4 2G4 AIO 5-in-1
1x Happymodel Mini M8N GPS
1x cicalino
4x Happymodel EX1202.5 motore brushless KV11500
1x Gemfan eliche bi-pala da 75 mm (4cw + 4ccw)
1x Caddx Ant 1200TVL Global WDR con OSD 2g Ultra Light Nano FPV fotografica
1x 5.8G integrato 25mw~200mw 40ch vtx (controllore di volo integrato)
1x Vite Driver
1x strumento di smontaggio dell’elica
SKYSTARS STX225
SKYSTARS STX225 Versione fai da te 225mm RC FPV Racing Drone PNP conF405AIO RGB LED 1200TVL 40CH 600mW VTX
Avviso: questa è la versione fai-da-te che viene smontata.
Specifica:
Marchio: SKYSTARS
Nome articolo: STX225 versione fai da te FPV drone da corsa PNP
Batteria consigliata 3-4S 1300-1500 mAh (pacchetto non incluso)
Kit telaio | Interasse: 225mm Spessore del telaio: 4mm Spessore piastra inferiore: 2mm Spessore piastra laterale: 2mm Telaio kit materiale: fibra di carbonio 3K |
2205 2300KV motore senza spazzola | Motore KV: 2300 RPM / V Corrente a riposo (Io / 10 V): 1,26 A. Cellula lipo: 3-5 s Peso: 26 g Corrente continua massima: 25A Potenza massima continua: 240W Massima spinta: 700 g (4S/5 “) Configura-zione: 12N / 14P Resistenza motore (RM): 0,0572 Ω Diametro statore: 22mm Spessore statore: 4mm Diametro del motore: 27,55 mm Lunghezza del corpo motore: 20mm Lunghezza totale dell’albero: 34,2 mm Albero adattatore per elica: M5 Spaziatura dei fori dei bulloni: 16mm Filettatura bullone: M3 Elica: 5inch |
35A BLHeli_32 RGB LED ESC | Corrente continua: 35A Corrente di picco: 40A (10S) Tensione di ingresso: 2-5 S BEC: NO bec Chip di controllo principale: STM32F051 Firmware: BLHeli_32 supporta 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150 / 300/600/1200. |
F405AIO | Aggiornato. Click For Details Barometro Inculd. 5x UART 1x Gruppo di G / S1/S2/S3/S4 pastiglie per 4in1 ESC Segnale / GND 4x coppie d’angoli per connessioni ESC Signal / GND (compatibile con DSHOT) 1x coppia di pad I2C1 1x pulsante per la modalità BOOT (DFU) |
1200TVL CMOS fotografica | Dimensioni della cassa: 19mm * 19mm Peso: 9,5 g Pixel totali: PAL: 1020H × 596V (0,61 MP); NTSC: 1020H × 508 V (0,52 MP) Pixel effettivi: PAL: 976H × 582V (0,57MP); NTSC: 976 H × 494 V (0,48 MP) Sistema di segnale: commutabile PAL / NTSC Rapporto di risoluzione (centro orizzontale): 1200TVL Uscita video: 1.0Vp-p / 75Ω Controllo automatico del guadagno: sì Bilanciamento del bianco: on / off opzionale Modalità di esposizione: esposizione di elettroni Otturatore elettronico: 1/50 (1/60) – 1/100000 S Correzione gamma: 0,45 / 1,0 Metodo di sincronizzazione: inter-sync Obiettivo fotografica: standard 2.3mm lente tensione di funzionamento: DC12V (ampia tensione, misurata può funzionare normalmente a 7,5-13 V) Corrente di lavoro: 70 mA (basso consumo energetico) Temperatura di lavoro: -20 ℃ ~ -60 ℃ Umidità: 0% ~ 98% |
5.8G 40CH 600mw commutabile VTX | Potenza di uscita e distanza di trasmissione: ≥0.5km@25mW, ≥1km @ 200mW, ≥2km @ 600mW Potenza di trasmissione: 600mW Formato video completo: NTSC / PAL Tensione di ingresso e dissipazione di potenza: 7 V ~ 24 V, + 12V / 190 mA Dimensioni: 38 * 18 * 8mm Peso: ≤16g (eccetto antenna) Con la funzione di auto-controllo della potenza in uscita. Tubo Nixie SCAN: punto di frequenza (1-8), banda di frequenza (AE), potenza (1-3, 0 = 0mw, 1 = 25mw, 2 = 200mw, 3 = 600mw) Antenna: RP-SMA |
5042 Elica a 3 pale | Materiale: PC Foro di montaggio: 5 mm Spessore del centro: 8mm Quantità: 2 paia Peso: 7.25G una coppia Colore: blu, rosso, giallo, viola, bianco MIX Consegna a colori in modo casuale |
Il pacchetto include:
1x STX225 versione FAI DA TE FPV drone PNP da corsa
Eachine LAL 5style 220mm 6S Freestyle 5 Inch FPV
The LAL series comes with a new 5style fpv racing drone.
It means 5 Inch freestyle fpv racing drone reached a new level of cost-effective and appearance.
Made with more TPU protection parts , smooth power system and more different receiver version to convenient your selection. PNP and BNF version has ready and you will love flying it . Let’s enjoy the 5style!
Note: TPU Camera mount for Gopro and Gopro7 camera show on the photo are not included. Camera mount will sale in spare part.
Specification:
Brand name: Eachine
Item name: LAL 5style 220mm 6S Freestyle 5 Inch FPV Racing Drone
Drone weight: 395.20g (Without Battery)
Frame Kit | Wheelbase: 225mm Bottom plate: 2mm Upper plate: 2mm Arm plate: 5mm X plate: 2mm |
Motor | Mode: 2307 KV: 1850 Idle current (IO/10V): 1.1A No.of Cells(Lipo): 3-6S Peak current: 40A Max. power: 960W Max. thrust: 1427g (6S/5″) Configu-ration:12N14P Internal Resistance(Rm): 0.0792Ω Stator diameter: 23mm Stator thickness: 7mm Motor diameter: 28.5mm Motor length: 19.7mm Shaft length: 34.2mm Shaft diameter: φ5mm Motor mount hole size: M3 Install hole distance: 16*16mm Recommend propeller: 5-7 Inch Weight: 36g |
ESC | 50A 3-6S Blheli_32 DSHOT1200 4 IN 1 ESC Continue current: 50A Burst current: 60A (10s) Input voltage: 3-6S BEC: NO Current sensor: YES Main control chip: STM32F051 Firmware: Blheli_32 Support DSHOT 150/300/600/1200/MULTISHOT/PWM/ONESHOT MOS: 5X6 Installation hole: 30.5×30.5mm/φ3 Dimension: 49x37mm Weight: 13.5g |
Flight Controller | LAL-F405 BT Flight Controller Main control chip: STM32F405 IMU: MPU6000 (By SPI) Input voltage: 2-6S Firmware: MATEKF405 Barometer: BMP280 Integrated OSD , support DMA mode (use F4 MCU control OSD) Support Betaflight configureBEC: 5V/2A ; 10V/2A Reserve MicroSD BlackBox 5 serial ports and I2C interface are reserved to facilitate GPS access (Bluetooth occupies TX5.RX5) Support receiver (PPM / DSM / IBUS / SBUS, SUMH, SUMD, SPEKTURM1024/2048, XBUS ) Supports programmable LED Sprit Supported firmware: betaflight / cleanflight / inav Reserved buzzer interface BAT and CRT, can monitor battery voltage and current (need additional current sensor) Install hole: 30.5×30.5mm Weight: 5.9g |
Camera | Caddx Ratel 1200TVL Camera Brand Name: Caddx Item Name: Ratel Color: Red Lens: 2.1mm Image Sensor: 1/1.8″ Inch starlight HDR sensor Horizontal Resolution: 1200TVL FOV: 180 Degree Min. Latency: 8ms TV System: NTSC & PAL (changeable) Image: 16:9 & 4:3 (changeable) WDR: Super WDR (HDR) Min. Illumination: Starlight Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Camera OSD: Separate OSD DNR: 3-DNR Language: ENG/FRANCE/RUS/SPA/PU/KOREA/CHN/JAPAN Day/Night: Auto/Color/B&W/EXT Dimensions: 19mm*19mm*19mm Wide Power Input: DC 5-40V Work Temperature: -20℃~+60℃ Work Humidity: 20%~80% Weight: 8g (N.W.)/ 40.5g (G.W.) |
VTX | TX805 /5.8G 40CH 25/200/600/800mw VTX Frequency: 5.8G Channels: 40CH Input voltage: 7V~24V 5V camera power: 120mA(MAX)—-25mW@12V 5V camera power: 200mA(MAX)—-200mW@12V 5V camera power: 300mA(MAX)—-600mW@12V 5V camera power: 350mA(MAX)—-800mW@12V Support TBS Smart Audio Power supply: 5V / 3A output for Camera Output power: 25mW/200mW/600/800mW switchable Antenna connector: MMCX Dimensions: 36X22X5mm 30.5hole Weight: 8g(Withour antenna) |
Propeller | Racerstar 5046 3-blade Meterial: PC Blade: 3 Color: Transparent Center thickness: 7mm Propeller diameter: 127mm Weight: 5.1g/pc |
Package Included:
1 x LAL 5style 220mm 6S Freestyle 5 Inch FPV Racing Drone
4 x CW 5046 Propeller
4 x CCW 5046 Propeller
1 x Retail Box
Eachine Tyro109 210mm DIY 5 Inch FPV Racing Drone PNP w/ F4 30A 600mW VTX Caddx Turbo Eos2 1200TVL Camera
Eachine Tyro109 210mm DIY FPV Racing Drone PNP w/ F4 30A Caddx Turbo Eos2 1200TVL Camera
Notice: It is DIY Version that comes unassembled.
The propeller color is Green & Yellow & Red and Transparent White.
Upgrade Diffirence from Tyro99
1. Motor is upgraded from 2150KV to 2400KV. ( More details refer to motor’s specification)2. FPV Transmitter is installed into the drone and in new design. Not exposed outside like tyro99. 3. FPV Camera is Caddx Turbo Eos2 1200TVL HD Camera
4. Upgrade the anti-vibration insulated column standoofs.
5. 5040 4-blade propellers
6. Antenna’s length was shorten in 50mm.
Specification: ( Manual )
Brand Name: Eachine
Model: Tyro109
Version: PNP ( Without Receiver)
Weight: 311g
Item | Specification |
210mm Frame Kit | Wheel base: 210mm Frame arm thickness: 5mm Bottom plate thickness: 2mm Side plate thickness: 2mm Frame kit material: 3K carbon fiber & 6065 aluminium |
2206 2400KV Brushless Motor | KV: 2400KV Idle current (Io/10V): 1.35A Lipo cell: 3-5S Weight: 31g Max continuous current: 35A Max continuous power: 560W Max thrust: 1180g (4S/5″) Configu-ration: 12N/14P Motor resistance (RM): 0.0536 Ω Stator diameter: 22mm Stator thickness: 6mm Motor diameter: 27.7mm Motor body length: 19.2mm Overall shaft length: 34.2mm Prop adapter shaft: M5 Bolt holes spacing: 16mm Bolt thread: M3 Propeller: 5-6 inch |
4 IN 1 30A BLHeli_S ESC | Continuous current: 30A Burst Current: 40A(10S) Input voltage: 2-5S BEC: 5V 2A BEC Main control chip: 48Mhz EFM8BB2 Firmware: BLHeli_S supports Dshot600 MOS: 5*6 |
Customized F4 Flight Controller | Main control chip: STM32F405 Sensor: ICM20602 Power supply: 5V Integrated OSD Onboard LC filter PID cycle rate & gyroscope refresh rate up to 32Khz Supports BetaFlight / inav racing firmware |
Caddx Turbo Eos2 1200TVL Camera | FOV: 160° WDR: Global WDR DNR: 2 DNR Lens: 2.1mm TV System: NSTC / PAL Optional Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 Latency: min 3ms Resolution: 1200TVL Min. Illumination: 0.001Lux@F1.2 Wide Power Input: DC 3.3-6V Work Temperature: -20℃~+60℃ Image Sensor: 1/3 inch COMS Aspect Ration: 4:3 S/N Ratio: >52dB (AGC OFF) Video Output: CVBS Auto Gain Control: YES BLC: YES Dimensions:14mm*14mm*16mm |
Xf5804 5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX | Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW Transmitting power: 0mW/25mW/200mW/600mW Full video format: NTSC /PAL Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW Size: 20*30*9mm Weight: ≤7g(except antenna) With output power self-check function. Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw) Frequency control method: Button frequency control (1-8): press the button for 2 seconds to enter the frequency setting, and press the button to change the frequency CH1-8.Change the frequency band (A-E), set the frequency, press the button for 2 seconds, then press the button to change the frequency group FR (A-E) |
Pagoda Antenna | Gain: 5dBi Max. Power: 50w Connector: RP-SMA Color: Black Weight: 8.6g Length: 78±3mm Max. Dia.: 22.4±1mm Min. Dia.: 11.8±1mm Frequency: 5.8G Impedance: 50Ω VSWR: <1.5:1 Polarization: Circular Polarized Radiation: Omni |
5040 5 Inch 4-Blade Propeller | Material: PC Mounting hole: 5mm Center thickness: 8mm Quantity: 2 CW + 2 CCW ( Same Color) Color: Green & Yellow & Red and Transparent White ( Delivery color randomly) |
Battery | Not included Recommend 3-5S |
Package Included:
1 x 210mm frame kit 2 x 2206 2400KV brushless motor CW 2 x 2206 2400KV brushless motor CCW 1 x 4 IN 1 30A BLHeli_S ESC 1 x Customized F4 flight controller 1 x Caddx Turbo Eos2 1200tvl 1 x XF5804 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX 2 x Battery strap
1x Antenna 2x 5040 four-blade propeller CW 2 x 5040 four-blade propeller CCW
Accessori stampante 3d
Eachine Tyro109 F4 DIY 5 Inch FPV Racing Drone PNP & 4 PCS Racerstar AirC 2207.5 2550KV 4S Brushless Motor Combo
About European Union VAT:
Goods purchased from Banggood and delivered to the destination located in the European Union (EU) ,the sales price includes VAT and duties(if applicable),and you do not additional payment is required. For more information about these costs, please contact the tax and customs authorities in your country.
Notice:
Tyro109 is DIY Version that comes unassembled. Need build it by yourself.
Specification:
Item Name: Tyro109 5 inch DIY FPV Racing Drone and 4 PCS 2207.5 2550KV Motor Combo
Eachine Tyro109 5 Inch DIY FPV Racing Drone ( More Details, Click here) | Wheel base: 210mmFrame arm thickness: 5mmFlight Controller: F4 OSD FCMotor: Eachine 2206 2400KV Brushless MotorESC: 30A BL_S 4In1 Brushless ESCPropeller: 2 Pairs 5040 5 Inch Propeller ( Color Randomly)VTX: Xf5804 5.8G 40CH 0mW/25mw/200mw/600mw switchable VTXFPV Camera: Runcam Nano 2 NTSC 4:3 FPV Camera |
Racerstar AirC 2207.5 2550KV Brushless Motor( More Details, Click here) | Item Name: 2207.5 2550KV 4S Brushless Motor KV: 2250KVQuantity: 4 PCSVersion: CW Screw ThreadConflgu-ration: 12N14PStator Diameter: 22mmStator Length: 7.5mmShaft Diameter: 5mmCable Length: 150mmMotor Dimension (Dia*Len): 29.6*19.7mmWeight: 152g |
Pacakge Included:1 x 210mm frame kit2 x 2206 2400KV brushless motor CW2 x 2206 2400KV brushless motor CCW1 x 4 IN 1 30A BLHeli_S ESC1 x Customized F4 flight controller1 x Caddx Turbo Eos2 1200tvl 1 x XF5804 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX2 x Battery strap
1x Antenna2x 5040 propeller CW2 x 5040 propeller CCW
4x Racerstar AirC 2207.5 2550KV Brushless Motor
4x Motor Nut
4x bag of Screws
Eachine Tyro99 210mm DIY Version FPV Racing RC Drone F4
Eachine Tyro99 210mm DIY Version FPV Racing RC Drone w/ F4 OSD 30A BLHeli_S 700TVL Camera 5.8G 40CH 600mW VTX
Note:
1. This is the DIY version that comes unassembled.
2. Make sure the antenna is installed at the output end before powering up to avoid damaging internal components;
3. Note that the input voltage is within the specified range and is correct and correct to avoid damaging internal components;
4. If the antenna is replaced, select a standing wave and a gain antenna for a longer transmission distance;
5. Pay attention to classic protection during transportation and installation.
6. Take-off weight is about 450g.
Item | Specification |
210mm Frame Kit | Wheel base: 210mm Frame arm thickness: 5mm Bottom plate thickness: 2mm Side plate thickness: 2mm Frame kit material: 3K carbon fiber & 6065 aluminium |
2206 2150KV Brushless Motor | Motor KV: 2150RPM/V Idle current (Io/10V): 1.26A Lipo cell: 3-5S Weight: 31g Max continuous current: 31A Max continuous power: 496W Max thrust: 1050g (4S/5″) Configu-ration: 12N/14P Motor resistance (RM): 0.0572 Ω Stator diameter: 22mm Stator thickness: 6mm Motor diameter: 27.7mm Motor body length: 19.2mm Overall shaft length: 34.2mm Prop adapter shaft: M5 Bolt holes spacing: 16mm Bolt thread: M3 Propeller: 5-6 inch |
4 IN 1 30A BLHeli_S ESC | Continuous current: 30A Burst Current: 40A(10S) Input voltage: 2-5S BEC: 5V 2A BEC Main control chip: 48Mhz EFM8BB2 Firmware: BLHeli_S supports Dshot600 MOS: 5*6 |
Customized F4 Flight Controller | Main control chip: STM32F405 Sensor: ICM20602 Power supply: 5V Integrated OSD Onboard LC filter PID cycle rate & gyroscope refresh rate up to 32Khz Supports BetaFlight / inav racing firmware |
700TVL CMOS Camera | Case size: 25mm*25mm Weight: 9.5g Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP) Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP) Signal system: NTSC Resolution ratio(horizontal center): 700TVL Video output: 1.0Vp-p/75Ω Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB White balance: on/off optional Exposure mode: electron exposure Electronic shutter: 1/50(1/60) – 1/100000 S Gamma correction: 0.45/1.0 Synchronization method: inter-sync Camera lens: standard 2.8mm Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V) Working current: 70mA (low power consumption) Working temperature: -20℃~-60℃ Humidity: 0%~98% |
5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX | Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW Transmitting power: 0mW/25mW/200mW/600mW Full video format: NTSC /PAL Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW Size: 20*30*9mm Weight: ≤7g(except antenna) With output power self-check function. Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw) |
Racerstar 5040 2 Blade Propeller | Material: PC Mounting hole: 5mm Quantity: 2 CW & 2 CCW Color: blue, red, yellow, purple, white (Delivery color randomly |
Battery | Not included Recommend 3-5S |
Eachine Tyro99 English Manual
Package included: 1 x 210mm frame kit
2 x 2206 2150KV brushless motor CW
2 x 2206 2150KV brushless motor CCW
1 x 4 IN 1 30A BLHeli_S ESC
1 x Customized F4 flight controller
1 x 700TVL CMOS camera 1 x 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX
2 x Battery strap
2 x Racerstar 5038 2 blade propeller CW
2 x Racerstar 5038 2 blade propeller CCW
DarwinFPV Baby Ape/Pro 142mm 3″ 2-3S FPV Racing RC Drone PNP 1104 4300KV motore senza spazzola – Nero piccola scimmia professionista
Descrizione:
Marca: DarwinFPV
Nome dell’articolo: Baby Ape/Pro 142mm 3 “FPV Drone
Colore: giallo/nero/viola
Peso: 71,6 g
Kit telaio da corsa da 142 mm (fare clic su) | Interasse: 142mmSpessore del braccio del telaio: 2,5 mmAltro spessore: 1,5 mmTelaio kit materiale: fibra di carbonio 3K |
1104 4300KV 2-3S motore senza spazzola | KV: 4300KVCellula Lipo: 2-3SPeso: 6,0 g |
AIO 4 IN115A BLHeli S ESC | Tensione di ingresso: 1-3SLIPoCorrente continua: 15ACorrente di picco: 17A (10S)Uscita BEC: nMCU: 48MHz EFM8BB21F16GProtocollo: DSHOY/Oneshot/MultiHhotDestinazione firmware BLHeli-S: SH-50Telemetria: noSensore di corrente: NoChip di controllo principale: EFM8BB21Aggiornamento del firmware: supporta Dshot600 Oneshot125MOS: 3 * 3 |
F411 Controllore di volo AIO (fare clic) | Chip di controllo principale: STM32F411Sensore: MPU6000OSD integratoCondivisione PPMDSM/IBUS/UAR: UART1-RXDistanza dei fori di montaggio: 25,5*25,5 mmSupporta il firmware BetaflightBaro: noScatola nera: no |
piccola scimmiaDarwin700TVL fotografica | Risoluzione: 700TVLLente: 1,8 mmIngresso: 3.5-5VSistema TV: PAL/NTSC |
Baby APE Pro CADDX ANT fotografica | Risoluzione: 1200 TVLSensore magico: sensore CMOS da 1/3″Ingresso: CC 3,7-18 VSistema TV: PAL/NTSC |
5.8G 40CH 0mW / 25mw / 200mw commutabile VTX | Supporta TBS SmartAudioPotenza di trasmissione: 0mW / 25mW / 100mW / 200mW commutabileCanale: 40CHFormato video completo: NTSC / PALTensione di ingresso: 7 V ~ 24 VDissipazione di potenza: + 12V / 600MWDimensioni: 25x20x6mmPeso: S3.2g (eccetto antenna)Con mini antenna a tubo di rame (antenna ipex) |
3016 elica a 3 pale | Materiale: PCForo di montaggio: 1,5 mmSpessore centrale: 5,5 mmQuantità: 2 paiaPeso: 1,18 ga coppia |
Lipo Batteria | Consiglia 2-3S 300-450mah (non incluso) |
Pacchetto incluso (opzionale):
1x cucciolo di scimmia/Pro 142mm 3″ FPV Drone
Nazgul5 227mm 4S 5 Inch FPV Racing
Desciption:
Introducing the Nazgul5 from iFlight. The Nazgul5 is a 5″ size BNF (Bind-and-Fly) quadcopter that comes fully built with everything you need to have an amazing flight experience! Just add a battery and a compatible radio and you are ready to take to the skies.
Made with high-quality carbon fiber weave gives the frame a great deal of sturdiness and TPU insertsdesigntoshock absorbing of FPV camera. Beginners and veterans alike will love flying the Nazgul
Specification:
-Brand Name: IFLIGHT
-Model: Nazgul 5
-Item Name: 227mm SucceX-EF4 Freestyle FPV Racing Drone
-Voltage Version: 2750KV @ 4S
-Drone Tpye: BNF / PNP ( Optional)
-Wheelbase: 227mm
-Weight: 362g (Without Battery)
– Take off weight: 470g
-Main Flight Controller: SucceX-E F4 (BETAFLIGHTF4 Firmware)
-ESC:45A 2-6S BLheli_S DShot600 4In1 ESC
-Motor: XING-E 2207 2750KV
-Propeller: IFLIGHT NAZGUL 5140 3-Blade Prop
-Receiver: FrSky XM+ Receiver/FrSky R-XSR Receiver Optional ( Only BNF Version)
-Camera: Caddx Ratel Camera
-FPV Transmitter: 0/25/600mW Adjustable frequency 48CH with IRC protocol
-Battery: Recommended 1300-1800mAh 4S (all version are Not Include battery)
Features:
-Full 3K Carbon Fiber airframe
-Easy arm swaps – swap arms by removing only 1 screw!
-Equipped with XING-E motors and NAZGUL 5140 props
-5″ version fits popular 5.1″ style propellers
-Popular True-X configuration
-Motorguard on the end of the arms to protect the motor during a crash
– Fits both 30.5x and 20x stacks
Package Included:
1x iFlight Nazgul 5 227mm FPV Drone 4S
2x Battery strap
4x NAZGUL 5140 CW Propeller
4x NAZGUL 5140 CCW Propeller
1xiFlightdoom Antenna
Note: The Hero 7 camera and TPU print camera mount are not included.
Recommend Parts (Not included):
TPU 3D Printed Camera Mount for Gopro Hero 4/5 Session ND8 Filter
TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 w/ ND8 Filter & Lens Protection Cap
iFlight 5140 NAZGUL Durable 5Inch Propeller
Eachine Wizard X220
Item | Specification | |
2205 2300KV Motor | KV : 2300 Propeller : 5 inch | |
Eachine 20A BLHELI_S ESC | Item name : 20A BLHELI_S ESC Con.Current : 20A Peak Current(10s) : 25A Input Voltage : 2-4S BEC : No Programming : YES Firmware : Blheli_S Weight :7.9g Size(PCB) : 27*12mm | |
700TVL Camera | Power supply : 3.6-5.5V (powered off TX) Power consumption : 60mA @5V Imager : 1/3” CMOS, 700TVL Angle : 127° diagonal FOV, 110° horizontal FOV FPV tuned light handling System : PAL Lens : 2.8mm IR coated FOV : 127°diagonal 110°horizontal (ideal for fixed camera) Operation temperature : -20 to 70°C Square : 29 X 29 X 23.5mm Lens extrude (LxDia) : 15mm X 14mm Weight : 12g | |
5.8G 200mw 40ch Transmitter | Modulate : Wideband FM Modulate Video Format : NTSC/PAL Output Impedance : 50 Ohm Output Power : 23-24dBm Channel: 40 CH Operating Voltage : 7V-24V Supply Current : 190mA Operating Temperature : -10~85℃ Video Band Width : 0~8.0 MHz Audio Carrier Frequency : 6.5 MHz Video Input Level : 0.8~1.2 Vp-p Video Input Impedance : 75 Ohm Audio Input Level : 0.5~2.0 Vp-p Audio Input Impedance : 10K Ohm Connector: RP-SMA Female (Inner needle) Antenna connector: RP-SMA Male (Inner hole) Dimension: 40mm x 23mm x 8mm Weight: 7.3g | |
Flight controller | F3 6DOF, betaflight 2.9.1 version | |
Kingkong 5040 3-Blade Propeller | Color: purple Quantity: 10 Pairs Mounting Hole: 5mm Weight: 137g Size: 140*140*65 mm |
Package included:1 x Eachine Wizard X2202 x 2205 KV2300 brushless motor CW2 x 2205 KV2300 brushless motor CCW4 x Eachine 20A BLHELI_S ESC10 x Kingkong 5040 3-blade propeller purple CW 10 x Kingkong 5040 3-blade propeller purple CCW1 x F3 6DOF flight controller1 x 700TVL camera 1 x 5.8G 40CH 200mw transmitter1 x Antenna1 x Battery strap2 x Wrench
Eachine Wizard X220 V2
Information on additional fees
When a package is delivered internationally, the buyer is responsible for paying the additional charges such as VAT, and/or customs duties imposed by the destination country, please contact the customs office in your country.
Note:
(Package doesn’t include for gopro7, the gopro7 on the pictures for reference only.)
PNP Version doesn’t include battery,charger , remote control and receiver.
Upgraded Feature:
x220 V1 | x220 V2 | |
Flight Controller | F3 6DOF | F405 DJI DUAL BEC |
Motor | 2205 2300KV | 2207 2550KV |
ESC | 20A Blheli_S ESC (Single ESC) | 30A Blheli_S ESC (Single ESC Easy Replacement) |
Camera | 700TVL Cmos NTSC | FOXEER 600TVL PAL CCD (976 (H) x494 (V) Pixel)1/3 inch SUPER HAD II CCD + Nextchip 2040 DSP |
VTX | 200mW VTX | 600mw VTX SmartAudio |
Camera Mount | for Rumcam | 3D Printed Mount for Gopro5/6/7 |
Frame Kit | 4mm Arm with Side Plate | 5mm Arm Without Side PlateQuick release Arm (1 screw) and Upper Plate(3 screws) |
TPU 3D Printed Part | NO | YES (Include Motor Protection Part, Safely Landing) (Include 3 IN 1 Antenna Mount, for VTX / 2.4G Recevier/ 915 Antenna) |
Description:
Brand: Eachine
Item Name: Wizard X220 V2 5 Inch 4S FPV Racing Drone PNP
Drone Weight: 407g (with Camera Mount)
Frame Kit | Wheelbase: 225MMFloor thickness: 2.0MMUpper board thickness: 2.0MMX board thickness: 2.0MMThe thickness of the side panel of the camera: 1.5MMArm thickness: 5.0MMFrame material: T300 carbon fiber |
Motor | Motor KV: 2550RPM/VNo-load current (Io/10V): 1.35AAdipocytes: 3-5SWeight: 31 gramsMaximum continuous current: 35AMaximum continuous power: 560WMaximum thrust: 1180g (4S/5″)Configuration: 12N/14PMotor resistance RM: 0.0536ΩStator diameter: 22mmStator thickness: 7mmMotor diameter: 27.7mmLength of motor body: 19.2mmTotal shaft length: 34.2mmDrive shaft: M5Bolt hole spacing: 16mmBolt thread: M3Propeller: 5-6 inches |
PDB-XT60 | Mount holes:30.5×30.5mm BEC:NO |
F405 DJIDUAL BEC V1 Flight Controller | CPU: STM32F405RGT6Six axis: MPU6000 Mount holes: 30.5×30.5mmSize: 37mm x 37mm barometer:BMP280 BEC:5V/3A,9V/2ABalck box :16MFirmware version: EachineF405 (STM32F405)OSD: Built-in BetaFlight OSD (STM32 controls the OSD chip through SPI in DMA mode)Receiver: Support Frsky XM / XM + receiver / Futaba receiver / Flysky receiver / TBS Crossfire receiver / DSMX receiver |
30A Blheli_S 2-4S ESC | Support PWM, Oneshot125, Oneshot42, Multishot, Dshot300, Dshot150, Dshot600Input voltage: 2S-4S LipoContinuous current: 30APeak current: 35AFirmware: BLHELI-S GH-30 |
FOXEER Arrow MICRO PRO Camera | Image sensor: 1/3 inch SUPER HAD II CCD + Nextchip 2040 DSPPixel: PAL: 976 (H) x494 (V)P/n system: PALResolution: 600TVL (color) 650TVL (black and white)Synchronization: internalMinimum illumination: 0.01LuxWDR: SupportOSD programming board: SupportNoise repair: SupportDNR: 2D DNRCamera title: SupportImage adjustment: SupportOSD: Edit name, power, flight timeInput power: 5-40VStorage temperature: -40℃~60℃Working temperature: -10℃~50℃Power consumption: 70mALow pressure alarm: SupportPreset modes: DEF, VIVID, SUNY, CLOUDY, LED TR, USR1Size: 21.8×21.8mmWeight: 8.7g (not including stand) |
TC5804 PRO VTX | Product name: 5.8G 40CH 0mW / 25mw / 200mw / 600mw VTX switchable Output power and transmission distance: ≥0.5km@25mW, ≥1km to 200mW, ≥2km to 600mWTransmitting power: 0mW / 25mW / 200mW / 600mWFull movie format: NTSC / PALInput voltage and power consumption: 7V~24V, +12V / 260mA @ 600mWProtocol: SmartAudioSize: 36 * 36 * 6mmWeight: ≤7g (not including antenna)With output power self-check function.Digital tube scanning: frequency point (1-8), frequency band (AE), power (1-3, 0 = 0mw, 1 = 25mw, 2 = 200mw, 3 = 600mw)Weight: 4.5g |
RACERSTAR-5046 Propeller | Brand Name: RacerstarModel: Tornado 5046Quantity: 4 CW/4 CCWColor: transparent blackMaterial: PCRoot thickness: 7mmMounting shaft: 5mmMaximum propeller width: 17.5mmLength: 5 inchesWeight: 5g |
Recommend Battery (Not Included): 4S:1300mAh
Package Included:
- 1 x X220 V2 Frame Kit
- 2 x 2207 2550KV Motor CW
- 2 x 2207 2550KV Motor CCW
- 1 x PDB-XT60
- 1 x F405 DJI DUAL BEC V1 Flight Control
- 4 x 30A Independent ESC
- 1 x FOXEER Arrow MICRO PRO Camera
- 1 x TC5804 PRO VTX
- 4 x 5046 3-blade propeller CW
- 4 x 5046 3-blade propeller CCW
- 1 x 30° Camera Mount (For Gopro5/6/7)
- 1 x Charger
- 1 x Antenna
- 2 x Battery strap
- 2 x Carbon Wrench
Eachine Wizard X220S
Description:
Item | Specification |
Eachine Wizard X220S | Wheelbase: 220mm Frame arm: 4mm carbon fiber Weigh: 356g (without battery and camera mount) Take off weigh: 561g3K carbon fiber frame kit, 4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220.Frame kit with camera angle scale and 30° camera mount for Runcam 3 Gopro session. Anti-vibration sponges to protect the racer frome crashing. |
Eachine MN2206 2300KV motor | KV: 2300 Max thrust: 1100G Length: 35MM NO.OF cell: 3-5S Diameter: 28MM Framework: 12N14P Shaft: 5mm Propeller: 5 inch Weight: 28g |
Eachine 30A BLHELI_S 4 in 1 ESC | Con. current: 30A Peak current (10S): 35A Input voltage: 2-5S BEC: 5V output Programming: YES Firmware: blheli_s Weight: 28g Size: 36*36MM |
Eachine 1179 800TVL CCD camera | Color: purple Sensor: CCDResolution(horizontal center): 800TVLShell size: 25mm*25mmWeight: 11gResolution: PAL: 1980H×1080 (2MP)Format: PALVideo output: 1.0Vp-p/75ΩAutomatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.AWB: ON/OFFExposure mode: electron exposureElectronic shutter: 1/50(1/60) – 1/100000 SGamma correction: 0.45/1.0Synchronization method: internal synchronizationLens: standard 2.8mm lens Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)Workig current: 70mA (low power consumption)Workig temperature: -20℃–60℃Humidity: 0%~98% Strong backlighting effect |
5.8G 40CH 25MW 200mw 600MWswitchable transmitter | Video Format : NTSC/PAL Channel: 40CH Operating Temperature : -10~85℃ Connector: RP-SMA FemaleAntenna connector: RP-SMA Male |
Omnibus F4 V3 flight controller | Size: 36x36mmMount holes: 30.5×30.5mm STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time. Using F4 MCU controls OSD over SPI bus in DMA mode.OSD Configation has been included in Betaflight GUI. SBUS/PPM input (Pinheaders)6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)With barometerSPI Sensor MPU6000 Included 128Mbit Flash, please always use BEC for the FC.Supported by BETAFLIGHT and dRonin |
Eachine 5051 3-blade propeller | Color: purple Quantity: 10 Pairs Mounting Hole: 5mm |
This is the ARF version that comes without battery, charger, receiver and remote control.
Package included:
1 x Eachine Wizard X220S frame kit2 x 2206 2300KV motor CW 2 x 2206 2300KV motor CCW1 x Eachine 30A BLHELI_S 4 in 1 ESC1 x Omnibus F4 V3 flight controller1 x 1179 800TVL camera 1 x 5.8G 40CH 25MW 200mw 600MW switchable VTX
10 x Eachine 5051 3-blade propeller purple CW10 x Eachine 5051 3-blade propeller purple CCW1 x 30° Camera Mount(For Runcam3/Gopro session)1 x Pagoda antenna2 x Battery strap2 x Wrench
iFlight TurboBee 160RS 165mm Wheelbase 4Inch DIY Build Kit FPV Racing Frame Set SucceX Micro V1.5 15A 4IN1 ESC XING 1404 3800KV Motor
About European Union VAT:
Goods purchased from Banggood and delivered to the destination located in the European Union (EU) ,the sales price includes VAT and duties(if applicable),and you do not additional payment is required. For more information about these costs, please contact the tax and customs authorities in your country.
Features:
-SucceX Micro F4 F1.5 Flight controller is 2-4s Lipo Compatible
-The lightest toothpick 1404 brushless motor on the market with double ball bearings
-Light, Powerful and smooth configuration
-Compatible both for 2s/3s Lipo/LIHV
Specification:
Wheelbase: 165mm
Body size: 123* 111mm
Weight: 29.9g
Standoff height: 25mm
Bottom Plate thickness: 2.5mm
Top plate thickness: 4mm
Flight control mounting holes: 16 * 16mm / 20 * 20mm
Support camera size: 14 * 14mm nano camera
Motor mounting holes: 14xx series (9mm)
Propeller size: 4 inch
Package included:
-160RS frame with duct x 1set
-TPU canopy x 1pc
– SucceX Micro V1.5+15A 4IN1 ESC flystack x 1set
– SucceX Micro300mW VTX
– XING 1404 3800KV motor x 4pcs
– T4030 propellers x 4pairs
– Sigma special antenna ipex/ UFL x 1pc
– Screws//Standoffs//spare cables
Eachine Wizard TS215
Description:
Item | Specification |
Eachine Wizard TS215 | Wheelbase: 215mmMaterial: 3K carbon fiberFrame arm thickness: 4mm Top plate thickness: 3mm Bottom plate thickness: 3mmArtist: hydrographics transfer printingVersion: optional BNF version and PNP versionWeight: 329g (excluding battery)Package weight: 870g Package size: 243mmx95mmx262mm |
TS 40A BLHeli_32 Brushless ESC | BEC: noContinuous current: 40APeak current (5S): 45AInput voltage: 2-6SCurrent sensor: built in LED indicator onboard, the light colors are adjustable.Supports Dshot1200, Dshot600, Dshot300, Dshot150. |
TS2306 2450KV Brushless Motor | KV: 2450NO.OF cell: 3-5SThrust: 2300g (16V 6040 2-blade prop)Framework: 12N14PMotor shaft: 5mmWeight: 32.5g |
Customized Omnibus F4 Flight Controller | CPU: f4STM32 F405 SCMBarometer: BMP280Input voltage: 3-5SSensor: MPU6000 SPIWith SD slotBuilt in OSD Built in 5V 3A BEC |
5.8G 72CH 25mw / 200mw / 500mw / 800mw VTX | Input voltage: 7-24VExtra features: smart audio, 0.01mW (parameter-adjusting mode)Power supply: 5V camera @ under 0.3A max.Output voltage: 25mW-100mA 200mW-200mA 500mW-260mA 800mW-300mA @ 12VRange: up to 4km with omnidirectional RHCP antennasAntenna connector: MMCX, RP-SMAPort connector: JST, 4pinDimensions: 30.5×30.5mmWeight: 8.5g (excluding antenna)Material: 128g double copperAdjustable 25mw / 200mw / 500mw / 800mwSupports smart audio (remote parameter adjustment) |
RunCam Swift 2 Camera IR Blocked | Image sensor: 1/3″ SONY Super HAD II CCDHorizontal resolution: 600TVL, 4:3 Lens: 2.3mm 150°Signal system: PALIntegrated OSD: YESIntegrated MIC: YESS/N Ration: >60dB(AGC OFF)Electronic shutter speed: PAL:1/50~100,000AutoGain control(AGC): YESBack light compensation(BLC): YESMin.illumination: 0.01Lux/1.2FWDR: D-WDRDNR: 2DNRDay/Night: Color / Auto / B&WPower: DC 5 to 36VNet weight: 14gDimensions: 28.5mm * 26mm * 26mmConnector: JST-XH 1.25mm * 5P/2P |
Frsky XM+ Micro D16 SBUS Receiver (BNF version only) | Dimension: 21.5*12*3.5mm(L x W x H)Weight: 1.6gNumber of channels: up to 16CH from SBUS (1-15ch for PWM,16ch RSSI for FC)Operating voltage range: 3.7~10VOperating current: 30mA @5VOperating range: full rangeWith RSSI output on board: analog 0~3.3VFirmware upgradeableCompatibility: FrSky D16 mode |
Storage Board 720P HD DVR | CPU: ARM926EJ-S–402MHzFlash: 16MbVideo resolution: NTSC:720×480; PAL:720x576Video code model: H.264Forms of video file: .AVIEvery video time: 15 minutesMemory capacity: Max 32G (Class10)Size: 36x36mmSupport power voltage: 4.5~5.5VMaximum operating current: 300mAOperating temperature: 0~+45 ℃Operating humidity: 15%~85% RHStorage temperature: –20~+50 ℃Storage humidity: 10%~90% RH |
DALPROP Cyclone T5046C 3-blade propeller | Size: 5046 5×4.6Mounting hole: 5mmColor: blue and transparent white |
Eachine Wizard TS215 English Manual
Package included:1 x Eachine Wizard TS215 frame kit4 x TS 40A BLHeli_32 Brushless ESC4 x TS2306 2450KV brushless motor1 x F4 flight controller1 x RunCam Swift 2 camera1 x 5.8G 72CH 25mw 200mw 500mw 800mw switchable VTX2 x DALPROP 3-blade propeller transparent white CW2 x DALPROP 3-blade propeller transparent white CCW2 x DALPROP 3-blade propeller blue CW2 x DALPROP 3-blade propeller blue CCW1 x Antenna1 x Battery plate2 x Battery strap2 x Carbon fiber wrench4 x Landing skid gear frame anti-vibration sponge
Flywoo Explorer LR 4”
Explorer LR quad is the masterpiece of the collaboration between Flywoo and #micro long range original creator Dave_C . #Micro long range is a brand new field, and we will explore more fun in this field with Dave_C in the future.
For me personally, Long Range cruising through epic landscapes is the best thing about FPV! But unfortunately, it was always kind of difficult to practice legally and without bothering people with all the noise a massive 6 or 7″ long range quad produces.
So the basic idea behind the original Project #MicroLongRange was born: Scale down a 7″ long range quad until it is below 250g take off weight. With the support of an awesome community on Facebook and Instagram as well as a massive development effort by Flywoo, this concept has seen a lot of improvements that are now all implemented in the Explorer LR!
This tiny quad is equipped with GPS, Crossfire and an independent model finder to give you the necessary confidence to push it to the maximum range of digital and analogue video transmission. The powertrain with it’s GOKU 16×16 stack and the all new 2700kV 1404 motors spinning 4″ props is optimized for maximum efficiency and low weight: Flight times of way over ten minutes on a regular 850mah 4S LiPo battery are easily achievable! Cruising speeds of 40-50 kph (25-30mph) are astonishingly high for such a small quad and have allowed me to do 10km (6 mile) round trips easily. And the best thing about it: It’s incredibly quiet! You nearly cannot hear it flying by as soon as you are a few dozen meters away. ”
—– Dave_C FPV
Specification:
Brand Name: Flywoo
Model: Explorer LR Caddx Ant 600mw VTX Version
Item Name: 4 Inch F4 OSD Long Range FPV Drone
Weight: 246g
Flight Time: 15-16 mins
GOKU F411 Micro Stack- F4 OSD Flight Controller | Brand Name: FlywooModel: GOKU F411 FC MCU: STM32F411 IMU: MPU6000 gyro/accelerometer (SPI) OSD: BetaFlight OSD w/ AT7456E chip Baro: no black box: 8M LED:8*WS2812 BEC Output: 5V@2A Integrated LC Filter Firmware target: FLYWOOF411 Size: 24×24mm board,16mm mounting holes (M3) Weight: 2.6g |
GOKU BS13A ESC | Brand Name: Flywoo Model: GOKU BS13A ESC ESC MCU: BB21F16G Continuous current: 13A Input:2-4s lipo Supports Dshot600 ,Oneshot,Multishot Size: 24×24mm board,16mm mounting holes (M3) Weight: 2.6g |
GOKU HM600 VTX 600MW | Frequency: 5.8GHz 5 bands 37 channelsRaceband: 5362-5945 MHZPower: PIT/25/50/100/200/600mW switchableControl Mode:IRC(RX)/ButtonBAT: +7-28V InputVideo System: NTSC/PALAntenna: IPXSize: 30.5mm×3.5mm×3mmWeight: 3 g |
NIN 1404 V2 2750KV Motor | Brand Name: FLYWOO Model: NIN 1404 Item Name: 1404 2750KV 4-6S Brushless Motor Color: Titanium Input Voltage: 4-6S Stator diameter: 14mm Stator height: 4mm KV: 2750KV Shaft size: M1.5 |
Gemfan 4024 Propeller | Brand Name: GemfanItem Name: 4024 4×2.4 4 Inch PropellerQuantity: 2 CW & 2 CCW |
Recommend Lipo Battery( NOT Included) | Recommend 4S 650-1300mAh Lipo XT30 Plug |
Feature:
1.The lightweight 4-inch quad below 250g even if you connect with the battery, meet the current requested of FAA rules. Easy to control and long flight time, we strongly recommend to FPV beginners and pilots who like to cruise!
2.Equipped with GOKU 16X16 MICRO STACK, and NIN 1404 v2-2750kv, support 4s battery. You can get up to 20 minutes for cruising! So this is a quad that is very suitable for FPV beginners and long range enthusiasts!
3.We recommend installing side carbon fiber plate to increase the strength and stability of the Arm.
Flywoo Finder v1.0 how to work?
1 Flywoo Finder v1.0 can power itself to beep and LED light to flash even the quad battery has been ejected.
2 Fingder v1.0 can work for 4-5 hours.
3 Press the button for 3 seconds to close it
Flywoo Goku Gps Mini V1.0 rescue function how to work ?
1. Before disarm, GPS must search for more than 5 satellites to lock the home position.
2. After disarm, observe the OSD data during the flight, and the rescue function can work normally only if the distance exceeds 100 m. Otherwise, the quad will crash.
3. If the remote control suddenly loses signal, the GPS rescue function will work automatically and return to the home position. (Set the AUX of GPS rescue mode in betaflight Failsafe, the default is AUX3 2000)
Flywoo ATOMIC 5.8G antenna customized for Explorer LR ! Of course it is also suitable for any other FPV drones!
Package Included:
1* Prebuilt and tested Explorer LR Drone
1* Side carbon plate 1 set
1* Spare srew
2*Gemfan 4024 4pcs
SKYSTARS STX225 DIY Version 225mm RC FPV Racing Drone PNP w/ F405 AIO RGB LED 1200TVL 600mW VTX
Specification:
Brand name: SKYSTARS
Item name: STX225 DIY version FPV racing drone PNP
Recommended 3 – 4S 1300 – 1500mAh battery (package not included)
Frame kit | ● Wheel base: 225mm● Frame arm thickness: 4mm● Bottom plate thickness: 2mm● Side plate thickness: 2mm●Frame kit material: 3K carbon fiber |
2205 2300KV Brushless Motor | Motor KV: 2300RPM/V Idle current (Io/10V): 1.26A Lipo cell: 3-5S Weight: 26g Max continuous current: 25A Max continuous power: 240W Max thrust: 700g (4S/5″) Configu-ration: 12N/14P Motor resistance (RM): 0.0572 Ω Stator diameter: 22mm Stator thickness: 4mm Motor diameter: 27.55mm Motor body length: 20mm Overall shaft length: 34.2mm Prop adapter shaft: M5 Bolt holes spacing: 16mm Bolt thread: M3 Propeller: 5inch |
35A BLHeli_32 RGB LED ESC | Continuous current: 35A Peak Current: 40A(10S) Input voltage: 2-5S BEC: NO bec Main control chip: STM32F051 Firmware: BLHeli_32 supports 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150/300/600/1200. |
F405AIO | Updated. Click For Details ● Inculd barometer.● Sensor: MPU6000● Power supply: 5V● Integrated OSD 5x UARTs1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)1x pair I2C1 pads1x press button for BOOT(DFU) mode |
1200TVL CMOS Camera | Case size: 19mm*19mm Weight: 9.5g Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP) Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP) Signal system: PAL/NTSC switchable Resolution ratio(horizontal center): 1200TVL Video output: 1.0Vp-p/75Ω Automatic gain control: yes White balance: on/off optional Exposure mode: electron exposure Electronic shutter: 1/50(1/60) – 1/100000 S Gamma correction: 0.45/1.0 Synchronization method: inter-sync Camera lens: standard 2.3mm Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V) Working current: 70mA (low power consumption) Working temperature: -20℃~-60℃ Humidity: 0%~98% |
600mw switchable VTX | Frequency band: A – E ( 8 channels in each band )Transmitting power: 600mWFull video format: NTSC / PAL Input voltage: 7V – 24VTransmission distance: more than 0.5km ( 25mW ), more than 1km ( 200mW ), more than 2km ( 600mW )With output power self-check function Antenna connector: MMCX |
5042 3 Blade Propeller | Material: PC Mounting hole: 5mm Center thickness: 8mm Quantity: 2 pairs Weight: 7.25G a pair Color: blue, red, yellow, purple, white MIX Delivery color randomly |
Note: Battery is Not Included.
Package included:
1x STX225 DIY version FPV racing drone PNP
Realacc Real5 215MM FPV Racing Drone PNP Omnibus F4 30A Blheli_S ESC 25/200/600mW VTX 800TVL Camera
Specification:
Brand name: Realacc
Item name: Real5 215MM FPV Racing Drone
Motor: 2206 2600KV
Frame Kit:
Wheelbase: 215mm
Arm plate: 4mm
Other board: 2mm
Omnibus F4 Flight Controller:
STM32F405
LC filter: YES
Replaceable Sensor: MPU-6000 with SPI Data Bus or Next-Generation Sensor ICM-20608G
Support D-Shot ESC
Lipo 2-4S input,
Built-in 1.5A
BEC
DFU button
Black box, maximum 16M data record
SBUS / PPM / Spektrum satellite
Support WS2812 light bar
Buzzer port
PCB 36 * 36mm
Mounting hole 30.5 * 30.5
Support RaceFlight BetaFlight
ESC:
4 in 1 integrated ESC
Current: 30A * 4
Maximum current: 35A * 4 up to 6S
Working voltage: 2-4S Lipo
Size: 36 * 36mm
Mounting hole: 30.5 * 30.5mm
Firmware: BLHeli_S
Support: Support Dshot150 / 300/600, Oneshot125 / 42, Multishot, PWM
Main IC: EMF8BB21F16G SILABS, 8bit C8051, run 50MHz
VTX:
Transmit power 3 block switch: 25mW / 200mW / 600mW
Channel: 48CH
Video format: NTSC / PAL;
Power consumption: 7V ~ 24V, + 12V / 260mA @ 600mW;
Small size: 36mm × 36mm × 5mm
Light weight: ≤ 6g (without antenna);
Connection is more stable: mmcx turn sam connector
Camera:
800TVL CCD 2.8mm lens
Size: 25mm * 25mm, Weight: 9.5g
Full format video format: NTSC / PAL; (default PAL)
Working voltage: DC5-12V
Operating current: 70mA (low power consumption)
Package Included:
1 x 215mm Frame Kit
1 x Omnibus F4 flight controller
1 x 4 in 1 30A ESC
4 x 2206 2600KV motor
1 x 25mW / 200mW / 600mW VTX
1 X 800TVL Camera
LDARC 200GT 200mm F4 OSD FPV Racing Drone PNP w/ BLheli_S 5.8G 16CH 25mW 100mW VTX 600TVL
About European Union VAT:
Goods purchased from Banggood and delivered to the destination located in the European Union (EU) ,the sales price includes VAT and duties(if applicable),and you do not additional payment is required. For more information about these costs, please contact the tax and customs authorities in your country.
Specification:
Brand Name: LDARC
Model: 200GT
Item Name: 200mm Ture X Type Carbon Fiber FPV Racing Drone
Version: PNP ( Without Receiver and Battery)
Wheelbase: 200mm
Material: Carbon Fiber & 7075 Aluminum Alloy
Input Voltage: 3-4S
Recommend Battery: 4S 1000-1500mAh above 25C Lipo
Weight: 190g (Without Receiver and Battery)
Takeoff Weight: 205g
KK20 Flight Controller & ESC Flytower | Flight Controller Firmware: OmnibusF4 SD – Built-in Betaflight OSD Output Voltage for Camera: 5V Size: 25x25mm Mounting Hole: 20x20mm Weight: 3.7g Support DSMX , SBUS and PPM Receiver |
20A 4 In 1 ESC Con. Current: 20A Peak Current: 25A ( 5s) Firmware: BLHeli_S Input Voltage: 2-4S Size: 29x31mm Mounting Hole: 20x20mm Net Weight: 5.3g Support Oneshot42/125, Multishot, DShot150/300 and DShot600 | |
XT1806 2500KV Motor | Motor Width: 22.4mm Motor Height: 30.5mm Shaft Diameter: 5mm Weight: 21.1g ( with Nut) |
Q100 VTX | 16CH 25mW / 100mW VTX |
Camera | 600TVL CCD Fov 160 NTSC Camera |
Propeller | 5040 3-blade Propeller |
Features:
-Extreme light weight 5 inch prop racing drone
-Modular design, KK tower F4 with OSD FC, with betaflight firmware
-The structure uses 4mm thickness carbon fiber and 7075 aviation aluminum alloy material, light weight, high strength
Package Included:
1x LDARC 200GT Drone
5x 5043 Propeller CW & CCW
1x Battery Strap
4x Motor Base
BETAFPV Meteor75 1S 75mm Whoop Quadcopter FPV Racing RC Drone PNP / BNF M01 AIO fotografica VTX 1102 18000KV Motori – Frsky FCC
Il ricevitore TBS Crossfire Nano con antenna T Crossfire minima è disponibile sulla serie Meteor per tutti gli utenti CRSF. Questa variazione specifica è progettata solo per essere piccola, leggera e facile da usare.
Meteor75, un approccio migliore al micro drone da 75 mm che dispone di motori ad alto KV – 1102 motori da 18000KV e batteria BT2.0 450mAH, che offre ai piloti molta potenza per utilizzare sia gli spazi interni che quelli esterni come un piccolo parco giochi acrobatico.
Punto elenco
-Meteor75 è il whoop di prima generazione alimentato dal nuovissimo connettore BT2.0 da 450 mAh. Il connettore BT2.0
effettivamente diminuisce la resistenza del connettore interno per prestazioni di scarica molto migliori rispetto al PH2.0 iniziale
connettore
-Il sistema di alimentazione utilizza i più recenti motori 1102 da 18000KV e eliche a 3 pale da 40 mm, che forniscono ai piloti più forza
esperienza di un potente volo indoor e outdoor
Motori -1102-18000KV accoppiati a cuscinetti a sfere durevoli per aumentare il tempo di volo / prestazioni e bassi
manutenzione, mentre adotta il connettore PCB per consentire di ripararlo più facilmente una volta scollegato
-Il controller di volo ha pre-saldato il cavo BT2.0, che può fornire una corrente continua 9A più stabile e potente
-Viene fornito con un baldacchino per stampaggio a iniezione, più resistente e pesa solo 1,5 g
-Il pacchetto viene fornito con BT2.0 450mAh 1S lipo e cavo adattatore BT2.0-PH2.0. Il cavo adattatore è comodo per caricare la batteria BT2.0 con il caricatore PH2.0 di serie. Nel frattempo, abbiamo anche rilasciato BT2.0 Lipo Charger Board a
carica la batteria 6 pezzi allo stesso tempo
Specifica
FC e ESC: F4 1-2S AIO senza spazzola FC
Telaio: Beta75 Pro 2 Whoop Frame
Motori: motore 1102 18000KV
Puntelli: eliche a 3 pale da 40 mm (albero da 1,5 mm)
VTX e fotocamera: M01 AIO Camera VTX
Opzione ricevitore: Frsky XM / DSMX / Futaba S-FHSS/TBS Crossfire
Batteria: BT2.0 450 mAh 1S 30C Batteria
Tempo di volo: 3-4min
Peso: 28,7 g (senza batteria)
Controllore di volo
Usiamo il classico F4 1-2S AIO senza spazzola FC sul drone Meteor75. Perché non la scheda FC più leggera F4 1S AIO senza spazzola?
La corrente di scoppio del Meteor75 potrebbe arrivare a 15A anche con 1S. Questa scheda FC 1-2S F4 potrebbe reggere così in alto
corrente nel continuare a volare. Ovviamente, la differenza di peso di 1 g non ha senso per un drone simile.
Questo AIO F4 FC è adatto per un drone whoop leggero 1-2S perfettamente, integrato con un processore Betaflight F411 FC,
Betaflight OSD, ricevitore SPI Frsky e 1-2S 5A ESC.
SPECIFICHE DI FC & ESC
CPU: STM32F411
Sei assi: MPU6000
ESC 1-2S integrato con 5A corrente continua e picco 6A
Supporta BLHeliSuite programmabile
Firmware di fabbrica: S_H_50_REV16_7.HEX
Baldacchino stampato ad iniezione
Dal momento che il drone whoop Meteor75, utilizzeremo una calotta stampata a iniezione, che è solo 1,5 g con supporto per fotocamera. Certo, molto resistente rispetto al baldacchino originale.
M01 AIO fotografica VTX- L’unità è ultraleggera di soli 3 g, perfetta per Meteor75. Viene fornito con un super Mini 5,8 GHz FPV
Trasmettitore + 800TVL C01 fotografica + Antenna RG178, dispone di 6 bande e 37 canali sulla banda 5,8 GHz con Raceband.
motori
I motori 1102 18000KV hanno un ottimo equilibrio tra peso e potenza su questo piccolo drone da 75 mm 1S whoop. Solo 2,9 g con connettori. Con l’elevato valore di 18000KV, potrebbe avere una grande potenza di perforazione anche solo con la batteria 1S. Inoltre, adotta il connettore PCB per consentire di ripararlo più facilmente una volta scollegati i cavi.
Il pacchetto include:
1 * Meteor75 senza spazzola Whoop Quadcopter (1S)
1 * 450 mAh 1S 30C Batteria con connettore BT2.0
1 * Cavo adattatore BT2.0-PH2.0
iFlight Nazgul5 V2 240mm 5 Inch 6S Freestyle FPV Racing Drone BNF/PNP Caddx Ratel Cam SucceX-E F4 45A ESC 2207 1800KV Motor – Without Receiver
PRODUCT DESCRIPTION
Nazgul5 V2 is a 5″ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your for GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
Specification:
- SucceX-E F4 45A flight stack
- XING-E 2207 FPV Motor (6S 1800KV )
- Wheelbase: 240mm*240mm
- Body size: 170*170mm
- Propeller size: 5 inch /5.1 inch
- FC pattern: 30.5*30.5/20*20 mm
- FPV cam spacing: 19mm
- Weight: 393.4g (without battery)
SucceX-E F4 Flight controller | – MCU:STM32F405- Gyro:MPU6000- Betaflight OSD:YES- Blackbox:8MB- 4X Uarts(1 2 3 6 )- 8 x Dshot/Proshot/Oneshot output- 8 x individual ESC power/ signal pads- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX- VTX telemetry: YES- WS2812 led Strip:YES- Baro:No – Beeper:YES- Input:2-6S(Max 8S)- BEC:5V/2.5A cont- Firmware target : BETAFLIGHTF4- Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm- Dimensions:36*36mm- Weight:7.6g |
SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC | – Dimension: 40*43mm- Mounting Holes: 30.5*30.5mm/Φ3mm- Weight: 14.4g- Supports 2-6S Lipo input- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware- Current sensor: YES- BEC: NO- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.- Target: G-H-30 BLS 16.7 |
SucceX Force 5.8g 800mW VTX Adjustable | – Item: SucceX-Force 800mW adjustable VTX- Input voltage:- Output voltage/ Max current: 5V 1A- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@500mW, 380mA@800mW- Output 48 frequency points, – size:36*36*3mm– PIT/25mW/200mW/400mW/800mW |
Feature:
– 5mm arm design for more durability
– Easy-Swap arms
– LED illuminated Logo
– XING-E 2207 motors and NAZGUL 5140 props
– 5″ version also fits 5.1″ style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks
Package Included:
- 1x Nazgul5 V2 240mm 5 Inch 6S FPV Racing Drone
- 1x Caddx Ratel, 2.1mm lens camera
- 1x Albatross RHCP SMA 5.8g antenna
- 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
- 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
- 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
Additional Suggested Parts (Not Included)
- Battery 6S 1300mAh
- Camera mount for GoPro
FACTORY SETUP and WIRING DIAGRAM:
This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.
Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK
20g Ultralight Flywoo Firefly 1S Nano Baby Quad 40mm FPV Racing Drone BNF w/ GOKU Versatile F4 5In1 1S AIO Flight Controller 250mW VTX 1200TVL Camera – ELRS 2.4GHz
About European Union VAT:
Goods purchased from Banggood and delivered to the destination located in the European Union (EU), VAT and duties(if applicable) have been included in their selling prices, and you don’t need to pay additional tax. For more information about these costs, please contact the tax and customs authorities in your country.
Introduction:
Firefly 1S Nano Baby Quad is an 20g ultralight 1S Quad for freestyle and crusiong. Pilots can enjoy up to 8 minutes and 45 seconds flight time with Flywoo’s latest 1S 450mah ! Through a lot of tests, we found the best configuration for Firefly 1S nano baby quad! It is not only suitable for cruising super long flight time, but also perfect for freestyle like a ripper.
Last but not least, it is very quiet, like a mosquito, suitable for both indoors and outdoors.
Features:
Equipped with GOKU Versatile F4 5-IN-1 1S AIO W/250mw VTX AIO Flight controller, which is specially designed for 1S Nano Drone . reliable and stable
No Propellers in view, Anti-jamming VTX, NO Jello flight Footage, stable flight picture
Ultralight 20g, Pilots can enjoy up to 8 minutes and 45 seconds flight time with Flywoo’s latest 1S 450mah
Perfect for freestyle and crusiong
it is very quiet, like a mosquito, suitable for both indoors and outdoors
Description:
- Brand: Flywoo
- Item Name: Firefly 1S Nano Baby Quad 40mm FPV Drone
- Weight: 20.4g
- Voltage:1S
- Flight Controller: GOKU Versatile F4 5-IN-1 1S AIO W/250mw VTX
- Motor: ROBO 0802.4 16500KV / 19500KV Fpv Motor
- Compatible Propellers: Gemfan 40mm
- Camera : 1.2g Flywoo 1S Nano Camera
- Receiver: SPI Frsky / Elrs 2.4G / TBS CRSF ( Optional)
- Flight time: 8mins ( take examples with Explorer 450mAh 1S 80C Lipo Battery for tiny quad -PH 2.0, not included this battery )
Package Included:
- 1 x Firefly 1S Nano Baby Quad 40mm Drone
- 2 x set of Gemfan 40MM 1610-2
FLYWOO XBOT65 / XBOT65-HD 103mm 4S 65MM FPV Racing RC Drone Stuzzicadenti BNF RUNCAM NANO 5.8G RHCP GOKU411 BLHELI 13A IRC Tramp VTX NIN 1103 MOTORE
Specifiche:
Marchio: FLYWOO
Modello: XBOT65 / XBOT65-HD
Controllore di volo: GOKU411
Fotocamera: RUNCAM NANO2 / RunCam Split 3 Nano 1080P 60fps HD
Motore a motore: 103mm (65MM PORP)
Elica: GF 65MMS (4 coppie)
Antenna: RG178 5,8 g RHCP
Motore a motore: NIN1103 7500KV (Oro)
Peso: 54 g / 64 g HD senza batteria
Ricevitore: Frsky XM +
Telaio: FLYWOO XBOT65 / XBOT65-HD
Carbonio: fibra di carbonio 3K completa
Motore a motore: 103mm
Piastra inferiore: 2,5 mm
Controllore di volo: GOKU411 STACK
MCU: STM32F411
Gyro: MPU6000
OSD: BetaFlight OSD con chip AT7456E
Target firmware: FLYWOO411
ESC: 13A * 4 BLHeli_S (Dshot / Multishot / OneShot) supporto 2 ~ 4S LiPo
VTX625: 5,8 GHz (Tramp IRC a 48 canali, PIT / 25/50/100/200 / 450mW)
– Batteria: si consiglia di utilizzare una batteria 2-4S 300 ~ 450mAh
Il pacchetto include:
– 1x FLYWOO XBOT65 / XBOT65-HD FPV Drone BNF (Frsky XM +)
– 4x GF 65MMS (4 coppie)
– 1x cinturino Batteria 10 * 100
– 1x cacciavite da 1,5 mm L.
BetaFPV Meteor65 Pro 1S Brushless Whoop Quadcopter FPV Racing RC Drone BNF w/ELRS 2.4G Receiver
Descrizione:
Meteor65 Pro viene fornito con un’elica da 35 mm per il miglioramento della potenza e un esperimento di volo flessibile. Oltre a ciò, ha quasi gli stessi componenti di Meteor65, come la scheda F4 1S 5A FC con ricevitore ExpressLRS integrato, fino a 350 mW M03 VTX, motori 19500KV 0802SE ecc.
Specifica:
Marca: BetaFPV
Articolo: Meteor65 Pro 1S senza spazzola Whoop
Peso: 22,0 g (senza batteria)
FC&ESC: F4 1S 5A FC (ELRS 2.4G)
Telaio: Meteor65 Pro 65mm 1S senza spazzola Telaio
Motori: motore 0802SE 19500KV
Eliche: eliche a 3 pale da 35 mm (albero da 1,0 mm)
Fotocamera: C02 Fotocamera
VTX: M03 25-350 mW VTX
Tettuccio: Tettuccio per Micro fotografica
Batteria: batteria BT2.0 300mah 1S
Tempo di volo: 4 minuti
Il pacchetto include:
1 * Meteor65 Pro senza spazzola Urlo Quadcopter (1S)
2 * 300mAh 1S 30C Batteria con connettore BT2.0
1 * BT2.0 Batteria Caricatore e tester di tensione
1 * cavo USB di tipo C
1 * Custodia personalizzata
1 * Eliche di ricambio a 3 pale da 35 mm (albero da 1,0 mm)
1*cacciavite
ZMR 250 Mini
ZMR 250 Quadcopter Kit Contents
- ZMR250 carbon fibre quadcopter frame
- 4x 2400Kv Brushless motors
- 4x 12A SimonK ESC
- 4x 5030 Propellers
- 1x CC3D Open Pilot Flight Controller
- 1x Power Distribution Board
Recommended Kit:
- 1300mah 75C 3S LiPo Battery or 1300mah 45C 3S LiPo Battery
- FlySky FS-i6 Transmitter with FS-iA6 Receiver
- FPV200 HS1177 Camera and VTX Bundle Pack
- Eachine VR-006 Mini FPV Goggles or EV800D FPV Moggles (Monitor and Goggles) with Diversity and DVR
- DroneBuildr Tool kit
Resources
- ZMR250 Assembly Guide (article)
- ZMR250 Assembly Guide (video)
- Adding FPV gear to the ZMR250 (FPV gear sold separately)
Type-A V4 / with RC Tx
Storm Type-A V4 specifications :
- Weight : 342 g (without battery)
- Dimension : 220mm (L) x 248mm x 45mm (H)
- Motor to motor : 280mm
- Propeller : HQ 5 x 4 x 4 4-Blade propeller
- VTX : 200mw with mushroom antenna
- Recommend battery : Support 3S 1500mah~2200mah LiPo battery
- Battery connector : XT60
- Radio System : RadioLink T8FB V2 2.4Ghz 8-Ch
Type-A V4 component highlights :
- Airy 2204-2300kv brushless motors
- Emax Bullet 35A BLHeli_S ESC
- BetaFlight F3 Flight Controller
- Foxeer XAT700 FPV Camera
- Storm FX799 200mw 5.8Ghz VTX
- Rear LED + Discovery and Warning Buzzer
- 5.8Ghz FPV mushroom antenna
- HQ 5 x 4 x 4 4-blade propellers
Type-B-V3 / with RC Tx
Type-B V3 component highlights :
- Airy 2204-2300kv brushless motors
- Emax Bullet 35A BLHeli_S ESC
- BetaFlight F3 Flight Controller
- Foxeer XAT520 HS1188 520TVL FPV Camera (100°)
- Storm FX799 200mw 5.8Ghz VTX w/ Raceband
- LED + Buzzer
- 5.8Ghz FPV mushroom antenna
- HQ 5 x 4 x 3 3-blade propellers
Storm Type-B V3 specifications :
- Weight : 391 g (without battery)
- Dimension : 185mm (L) x 2335mm x 73mm (H)
- Motor to motor : 255mm
- Propeller : HQ 5 x 4 x 3 3-Blade propeller
- VTX : 200mw with SMA-Female connector (inner hole)
- Recommend battery : Support 3S 1500mah~2200mah LiPo battery
- Battery connector : XT60
- Radio System : RadioLink T8FB V2 2.4Ghz 8-Ch
Type-E / with RC Tx
Type-E component highlights :
- Airy 2204-2300kv brushless motors
- Emax Bullet 35A BLHeli_S ESC
- BetaFlight F3 Flight Controller
- Airy AN650SL HS1177 FPV CCD Camera (650TVL)
- Storm FX799 200mw 5.8Ghz VTX w/ Cloverleaf Antenna
- Rear LED + Discovery and Warning Buzzer
- HQ 5 x 4 x 3 3-blade propellers
Storm Type-E specifications :
- Weight : 287 g (without battery)
- Dimension : 175mm (L) x 193mm x 50mm (H)
- Motor to motor : 225mm
- Propeller : HQ 5 x 4 x 3 3-Blade propeller
- VTX : 200mw with cloverleaf antenna
- Recommend battery : Support 3S 1500mah~2200mah LiPo battery
- Battery connector : XT60
- Radio System : RadioLink T8FB V2 2.4Ghz 8-Ch